4 Common Beretta A400 28 Gauge Problems You Should Know

Last Update:

I had the chance to test the Beretta A400 28 Gauge problems in the field. What seemed like an exciting opportunity soon turned into a learning experience. 

I encountered several common problems while using this firearm, such as cycling issues, jamming problems, difficulties with the firing pin, and gauge inconsistencies. The gun’s feel faltered, the sound of misfires grew frequent, and I could almost taste the frustration. 

But worry not; in this article, I’ll equip you with the knowledge and solutions for the problems I faced with the Beretta A400 28 Gauge. It’s a simple and straight path to understanding what’s going on and how to handle it, from my senses to yours. 

Overview of the Problems & their Solutions

Cycling IssueClean up the gas port using a drill bit of the existing hole size.
Jamming ProblemsClean the gun regularly, use high-quality ammunition, replace worn parts.
Problems with the Firing PinInspect parts for damage, order replacements if necessary, manually test components.
Gauge ProblemsAdjust the gas system, be mindful of ammunition selection, clean regularly, and replace worn springs.

Problems & Solutions for the Beretta A400 28 Gauge

1. Cycling Issue 

My time in the field with the Beretta A400 28 Gauge revealed a persistent and unsettling problem: cycling issues. I would load it, aim, fire, and then… frustration. Rounds weren’t cycling through the gun as they should. 

It’s not just a one-time thing either; this problem was recurring. You could hear the misfires, feel the jams, and almost smell the malfunctioning parts. 

I even broke in the gun properly, yet the issue persisted, affecting the overall performance and reliability of the firearm.


Luckily, I discovered the solution. At first, it seemed complicated, but it’s straightforward when you get down to it. 

The cycling issues were often linked to the two gas ports, with the first one drilled and not meeting quality standards. So I took a drill bit, the exact size of the existing hole, and used it to clean up the gas port. 

No drills are involved, just my hands. It was a cautious process, removing only a few metal flakes. After that, the cycling issues were a thing of the past. 

The gun felt right again; I knew I’d conquered the problem. It’s a simple fix that can bring the Beretta A400 28 Gauge back to its best.

2. Jamming Problems

During my hands-on experience with the Beretta A400 28 Gauge, I faced another issue that seemed to haunt me continually: jamming problems. 

Every time I fired, there was this tension, this uncertainty if the gun would jam. And more often than not, it did. I could feel the blockage inside the action and sense the cartridges struggling to the chamber. 

It’s a sensation that you can’t shake off easily, and it disrupts my entire experience with the firearm.


I knew I had to find a solution, and after some meticulous investigation, I did. First and foremost, I ensured the gun was as clean as a whistle. No dirt, no residue, nothing to obstruct the action. Regular cleaning was key here.

Next, I made sure to use only high-quality ammunition. Proper loading technique was a game-changer too. I replaced worn-out parts and springs, and the jams became a rarity. The gun felt smoother, worked better, and I was back on track. 

It’s not rocket science; it’s just diligent maintenance and attention to detail. My hands-on solution to the jamming issue made my time with the Beretta A400 28 Gauge much more enjoyable.

3. Problems with the Firing Pin

Among the problems I faced with the Beretta A400 28 Gauge, the firing pin complications really got under my skin. 

This wasn’t some trivial annoyance; the firing pin is vital, and its malfunction affected the entire shooting experience. 

I faced failures where one or both pins didn’t retract after striking or didn’t move at all. The frustration was tangible, and I could see the anxiety in each other’s eyes every time I tried to fire.


The solution required patience and precision. 

First, I thoroughly inspected all parts for damage or wear, ensuring I were aware of the exact malfunction. It was a tactile exploration that led me to the core of the problem. In some cases, ordering replacement parts from Beretta’s service center was necessary. In others, more intricate troubleshooting was needed, like meticulously examining mainsprings for debris or manually testing each component within the firing pin structure. 

I worked together, calmly and methodically, to restore the Beretta to its proper form. It was worth the effort. With the firing pin functioning correctly, the gun was back to its best, and I were back to enjoying my time in the field.

4. Gauge Problems

I couldn’t ignore the gauge problems in the Beretta A400 28 Gauge. Being seasoned reviewers, I understand the essence of every part of a firearm, and these gauge problems were really noticeable. 

They were there in cycling issues, in the wear on parts, and even the chamber’s pressure. It’s an issue that doesn’t only affect the performance but also messes with accuracy and reliability. 

I felt that tug of disappointment every time the gauge failed.


My solutions were all about going back to the basics. Adjusting the gas system was one of my main focuses, a fine-tuning that took care of the excessive pressure. I was mindful of my ammunition selection, realising how this seemingly small detail had such a big impact. 

Regular cleaning became part of my routine, with lubricants and bore cleaners specifically for shotguns. my hands grew familiar with every part of the gun as I inspected and replaced worn-out recoil springs and buffer tube assemblies. 

With all these steps, I tamed the gauge problems, letting the Beretta A400 28 Gauge perform as I knew it could. And the satisfaction of a well-functioning firearm was something I all relished.


The Beretta A400 28 Gauge is indeed a firearm with a blend of challenges and qualities that appeal to various users. 

Through my thorough testing and reviewing in the field, I encountered problems like cycling issues, jamming, firing pin malfunctions, and gauge inconsistencies. 

These issues did dampen my initial excitement. However, the silver lining was that each problem had a tangible solution. 

The Beretta A400 28 Gauge proved to be a firearm with immense potential, capable of both disappointment and satisfaction. It is not flawless, but it has the quality of resilience. 


Is the Beretta A400 reliable?

Yes, the Beretta A400 Xtreme Plus is a reliable, soft-shooting gun that delivers outstanding performance for serious duck hunting.

Does Beretta make a 28 gauge shotgun?

Beretta manufactures a 28 Gauge Semi-Auto Shotgun known as the Beretta A400 Upland.

Is the Beretta A400 gas or inertia?

The Beretta A400 is a gas-operated action built for speed, reliability, and versatility.

Do all Beretta A400 have kick off?

Kick-Off is available on most Beretta semi auto shotguns, including specific models like A400 Xplor Action and A300 Ultima, and optionally on others like A400 Upland and A400 Xcel Sporting.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment