5 Common CZ Sharptail Problems You Must Be Aware of

Last Update:

I’ve had the chance to put the CZ Sharptail through its paces, and let me tell you, it’s been an enlightening experience. 

Don’t get me wrong, CZ makes some fantastic firearms, but nothing’s perfect, right? After spending ample time with it in the field, I’ve encountered a handful of CZ Sharptail Problems that could be a bit concerning for some users.

First, we’ve got a recoil issue that may or may not leave you with a sore shoulder. Then there’s this odd double firing problem that occasionally rears its ugly head. 

Oh, and let’s not forget about the heavy trigger, which could mess with your aim. If that’s not enough, some concerns about the firing pin and safety feature have crossed my path.

I will dive into each of these problems, break them down for you, and most importantly, offer some solid solutions.

Overview of the Problems & their Solutions

Harsh RecoilClean or replace the recoil spring.
Double FiringClean trigger mechanism and replace parts.
Heavy TriggerClean and possibly replace the trigger spring.
Firing Pin IssuesClean and inspect the firing pin, replace if needed.
Safety Mechanism IssueConsult a certified gunsmith and revisit safety guidelines.

Top 5 CZ Sharptail Problems & Solutions

1. Recoil Spring Issue

Oh man, the recoil! When I first took the CZ Sharptail out, I noticed that the kick was pretty fierce, even by shotgun standards. My shoulder took a bit of a beating, and my aim suffered because of it. 

With every shot, it felt like I was wrestling a bull, and let’s just say the bull was winning. A harsh recoil can make for a lousy day at the range or out in the field.


Good news, fixing this isn’t too hard. My first move was to check out the Recoil Spring. After disassembling the shotgun, I found the spring dirtier than my boots after a muddy hunt. 

A quick clean-up, and voila, the recoil felt more manageable. If you’re facing similar issues, you might want to replace the spring if it looks worn out. 

Just ensure the new spring is the right fit for your gun, and you’ll be back in action, shooting comfortably in no time.

2. Double Firing Problem

I’ve had my fair share of startling moments with the CZ Sharptail when it decided to shoot twice instead of once. 

Trust me, that’s not a surprise anyone wants. It’s unsettling and could be pretty risky, especially if you’re not expecting that second shot to go off. 


Alright, let’s get down to business. First, always ensure the gun is unloaded before you start tinkering around. After that, I opened it up to check the trigger mechanism and the internal components. 

You won’t believe the amount of grime and dirt I found in there! After a thorough cleaning and replacing a few suspect parts, the double firing stopped. If you’re experiencing the same issue, get genuine replacement parts. 

And please, reassemble the gun carefully, following the manufacturer’s instructions to the letter. The last thing you want is to botch the assembly and end up back at square one.

3. Heavy Trigger Problem

Now, let’s talk about that heavy trigger. You might be thinking, “A trigger’s a trigger, right?” But let me tell you, a heavy trigger can mess with your shot big time. 

It felt like I was pulling a ten-pound weight just to get a shot off, making hitting my target way harder than it should be. It’s like having a sports car but needing to push the gas pedal to the floor to get it moving. 


First off, make sure that shotgun is unloaded. Safety always comes first. I took apart the trigger group to see what the deal was. 

Turns out, the trigger spring was looking a bit worse for wear. After giving everything a good clean and lubricating the moving parts, things were already feeling better. But to get it just right, I replaced the old spring with a new one. 

So if you’re up for some DIY, a deep clean and maybe a component replacement could also solve this issue. Just remember to reassemble carefully and test the trigger pull afterwards.

4. Problem with the Firing Pin

Ah, the firing pin, the heartbeat of any shotgun. When it starts acting up, you’re in for a world of frustration. 

I noticed my CZ Sharptail was misfiring and giving me abnormal discharges. One time, I pulled the trigger, and nothing happened. Next thing you know, it fires when I least expect it. Honestly, that’s a safety hazard right there, not to mention it’s annoying as heck when you’re trying to get that perfect shot.


First off, safety first, right? Make sure your shotgun is unloaded before you begin any repairs. Once I had the gun open, I examined the firing pin closely. It was dirty and showed signs of wear and tear. 

So, I got myself a soft-bristled brush and cleaning solution to give it a good scrub. I replaced the spring for good measure since it looked a bit weak. And guess what? After reassembling and lubricating the gun, it fired like a charm. 

If you find yourself facing a similar problem, you might want to replace the firing pin or the spring. But a good cleaning could also do the trick.

5. Safety Issue

Let’s talk about something that should never be compromised: safety. I’ve been using the CZ Sharptail for a while, and there was this unnerving moment when the automatic safety didn’t engage as it should. 

Yeah, you heard that right. This isn’t just about missing a shot; it’s about putting myself and others in danger. Imagine you’re all set, and then an accidental discharge happens. Frightening, isn’t it?


After that wake-up call, the first thing I did was take my gun to a certified gunsmith. The pros know what they’re doing and, sure enough, they fixed the automatic safety mechanism. 


So, there you have its a full rundown on the CZ Sharptail, a firearm with its strengths and areas for improvement. After spending a lot of time with it, I’ve found that it’s a reliable shotgun for the most part. 

Yes, it has some issues like the harsh recoil and double firing, but they’re mostly fixable with some cleaning and part replacement. 

A gun is a tool, and like any tool, you’ve got to know how to use it and maintain it properly.


How long is the CZ Sharptail barrel?

The barrel is 28 inches long.

Does CZ Sharptail have ejectors?

No, it has extractors, not ejectors.

What is the difference between CZ Sharptail and Bobwhite?

The Sharp-Tail is fancier and has a sideplated design, while the Bobwhite is a plain boxlock.

Where is the CZ Sharptail made?

The information wasn’t provided, but typically CZ firearms are made in the Czech Republic.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment