3 Most Common CZ 85 Problems And How To Fix Them

Last Update:

I recently got my hands on the CZ 85, took it to the range, and put it through its paces. As someone who’s been in the field and actually tested it, I felt it’s my responsibility to share what I’ve learned.

I’ve encountered some common CZ 85 Problems that seem to be bugging other users, too. We’re talking about issues like an uncooperative Ambi slide lever, trigger troubles, and the failure to extract.

But fear not! The aim of this article is to address these problems and offer practical solutions. That way, you can get back to enjoying what should be a reliable and effective firearm. So, let’s get into it, shall we?

Overview of CZ 85 Issues & their Solutions

ProblemsSolutions
Ambi Slide Lever ProblemApply gun-specific lubricant and work the lever.
Trigger IssueClean with compressed air and apply gun oil.
Failure To ExtractThorough cleaning of chamber and extractor, check ammo type.

Top 3 Problems & Solutions for the CZ 85

1. Ambi Slide Lever Problem

So, you’re on the range, practicing away, and you suddenly realize the Ambi slide lever on your CZ 85 is acting up.

I felt that, too! In my case, the lever felt stiff and unresponsive. Imagine you’re in a situation where every second counts; the last thing you want is a slide lever that’s not cooperating. 

It’s more than just an annoyance; it can actually mess with the gun’s overall performance.

Solution

Alright, so what did I do to fix it? I grabbed a little gun-specific lubricant. Yep, that’s simple. The trick is to apply just a smidge, not drown the poor thing. 

After applying, work the lever back and forth a few times to get the lubricant nicely distributed. This made a world of difference in my experience. 

The lever became responsive and smooth to operate. It’s a quick fix, but it works like a charm. Trust me, this tiny tweak can save you a lot of hassle.

2. Trigger Issue

Alright, let’s chat about the next headache—the trigger issue. Trust me, I was a bit bummed when I first experienced this problem. 

The trigger felt inconsistent during pulls; sometimes, it felt like I needed to exert more force than I should have. 

A sticky or mushy trigger is a no-go, especially when you’re counting on precise shots. This was a bit of a letdown for someone who’s used to a smooth, reliable trigger action.

Solution

Now for the good news! You can actually do something about this. First, get some compressed air to clean out any gunk or debris from the trigger assembly. A clean trigger is a happy trigger. 

Next, apply a drop or two of gun oil to the trigger mechanism. Don’t go overboard; you want to lubricate, not soak it. Finally, work that trigger back and forth a few times to spread the oil evenly.

I did this, and my trigger started behaving like it should—smooth and consistent. It’s a quick fix that made a world of difference.

3. Failure To Extract

So here’s an issue that made me scratch my head: failure to extract. Imagine you’re at the range, and just when you think you’re getting the hang of it, the spent cartridge stays stubbornly in the chamber. 

It happened to me a couple of times, and let me tell you, it throws you off your groove. When you fail to extract, you’re dealing with a firearm that’s momentarily out of commission. 

That’s a big problem, especially if you rely on this gun for more than just plinking at the range.

Solution

Okay, it’s time to turn that frown upside down! What worked for me was a good ol’ thorough cleaning of the chamber and extractor. I used a chamber brush to scrub away any buildup and ensured the extractor was debris-free. 

Then, a little lubricant on the moving parts. Also, consider checking your ammunition. Sometimes, the problem is as simple as using ammo that’s not ideal for your firearm. 

After these steps, my CZ 85 went back to functioning like a well-oiled machine. So don’t underestimate the power of a good cleaning and the right ammo.

Conclusion

Alright, folks, let’s wrap this up. The CZ 85 is undoubtedly a strong performer, but let’s be real: no firearm is perfect. I’ve had my share of woes with it, like the ambi slide lever stiffness, inconsistent trigger, and failure to extract. 

The good news? All these issues are totally fixable. You’re back in action with a little lube here and a good cleaning there. Remember, most problems can be solved with basic maintenance and attention to detail. 

That said, if you can look past these issues, the CZ 85 is still an excellent choice for those who need a reliable, durable firearm. So, if you’re willing to put in a bit of elbow grease, this gun can be a long-term partner in both practice and protection.

FAQs

Is CZ 85 discontinued?

Yes, it was discontinued.

Is the CZ 85 accurate?

Yes, capable of 2″ groups at 10 yards and 4″ groups at 25 yards.

Is CZ 85 a good gun?

Yes, it’s durable and designed for heavy use, making it a solid choice.

What is the difference between CZ 75 and 85?

CZ 85 has adjustable sights, an ambidextrous safety, and a better trigger due to the absence of a trigger block.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author

AUTHOR

I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment