Recently, I’ve spent some time testing the CZ Hammer Classic in the field.
While the CZ Hammer Classic is an overall solid piece of craftsmanship, I encountered a couple of common CZ Hammer Classic Problems during my hands-on experience.
First off, the trigger issue caught my attention right away. I was all set, ready to shoot, but the trigger didn’t feel as smooth as I’d expected. Secondly, there’s the issue with the hammer screw.
In this article, I’ll dive into these issues, give you the lowdown on what’s happening, and offer some handy solutions.
Overview of the Problems & their Solutions
| Problems | Solutions |
| Trigger Issue | Take out locks, push triggers forward when reinstalling. |
| Hammer Screw Backing Out | Clean screws, apply blue Loctite, and tighten. |
Top 2 Problems & Solutions of CZ Hammer Classic
1. Trigger Issue
So there I was, out in the field, getting ready to take my shot. Everything seemed perfectly fine until, well, it wasn’t.
The left/rear trigger decided to be a pain. When I pulled it, the hammer stayed put and didn’t drop like it was supposed to. Even stranger, the trigger stayed depressed but accepted a second pull.
That’s when the hammer finally dropped and fired the ammo. This problem threw me off and made me question the reliability of the CZ Hammer Classic.
It’s definitely not something you want when you’re out in the middle of nowhere, counting on your firearm.
Solution
Alright, so what’s the fix for this annoying problem? After fiddling around, I found that it had to do with the internal locks and triggers. I took the locks out, made sure to push the triggers forward when putting them back in, and guess what? It worked like a charm.
The sear leg on the lock now went above the trigger, just as it was supposed to. This simple maneuver resolved the issue, and I haven’t had any problems with the trigger since. It’s all in the details, folks.
2. Problem with the Hammer Screw
I have to tell you, one problem that got my attention was with the hammer screw. The first time I went out shooting, everything seemed fine. But guess what? When I got back and checked the gun, I realized one of the screws holding one of the hammers had backed way out.
It got me thinking: what if it had come off completely while I was in the field? That’s a safety risk no one wants to take.
Solution
So, what did I do? I decided to take action right away. I removed both screws and gave them a good cleaning.
Then, I grabbed some blue Loctite—this stuff works wonders for securing screws. I applied some of it on the screws and tightened them back into their places.
It’s been a game-changer. Since then, those screws haven’t budged, and I feel a lot more confident about the reliability of my CZ Hammer Classic.
Conclusion
So there we have it, folks. While an exceptional piece of hardware, the CZ Hammer Classic is not without its issues.
From the trigger snag to the hammer screw backing out, these problems could cause a headache. However, don’t jump to any conclusions just yet. These are common issues that many firearms have, and they’re definitely fixable.
I’ve tested the solutions myself, and they do work. The fact is, once these little kinks are worked out, the gun performs like a champ.
Overall, the CZ Hammer Classic is a reliable, well-crafted firearm that I’d recommend, but with the caveat that a little fine-tuning may be in order.
FAQs
What is the difference between CZ Hammer Classic and Bobwhite?
The Hammer Classic has 30-inch barrels, while the Bobwhite has 28-inch barrels.
Where are CZ Coach guns made?
Not provided.
When were hammerless shotguns invented?
The first hammerless shotgun was invented by Daniel Myron Lefever in 1878.
