Top 4 Smith and Wesson Model 60 Pro Problems And How To Fix

Last Update:

I recently had the chance to put the Smith and Wesson Model 60 Pro through its paces out in the field. Don’t get me wrong, this is an impressive piece of hardware, but even the best things have downsides.

During my tests, I encountered some issues that might be considered common among users of this particular model.

Specifically, I ran into four main problems: misfiring, issues with the cylinder, a jamming barrel, and grip concerns. 

Before you think that this model is a complete disaster, let me tell you that it’s not all bad. In fact, each of these problems comes with a solution, some easier than others to implement.

Overview of Smith and Wesson Model 60 Pro Problems

MisfiringDeep-clean the firing pin channel and lubricate lightly.
Cylinder IssuesDisassemble, clean thoroughly, and lightly lubricate the cylinder.
Jamming BarrelClean the barrel with a nylon brush and solvent; apply light lubricant.
Grip IssuesReplace with an aftermarket grip suited to your hand size.

Top 4 Problems & Solutions for the Smith and Wesson Model 60 Pro

1. Misfiring Problem

Alright, let’s get into the misfiring issue. When you’re out in the field, you expect reliability. I mean, you pull the trigger, and you want to hear that bang, right? But during my testing, I had a couple of instances where that didn’t happen. 

No bang, just a click. Talk about a letdown. Not only does this interrupt your shooting rhythm, but it can also be dangerous. If you’re in a situation where you really need your firearm to perform, a misfire can spell trouble. 

We’re talking about a serious issue that needs a quick and reliable fix.


After a couple of misfires, I knew I had to get to the bottom of this. So, I first did a deep clean of the firing pin channel. 

You’d be surprised at the kind of gunk that can accumulate in there. I used a proper gun-cleaning solvent and made sure I cleared out all the build-up. After cleaning, I lubed the area lightly. 

Tested it again, and what do you know? The misfires were gone. For anyone who’s experiencing misfires, I highly recommend taking the time to clean that firing pin channel thoroughly. 

But please, always remember to follow all safety guidelines when you’re handling your firearm.

2. Problem with the Cylinder

Okay, let’s talk about the cylinder issue. 

While out on the range, I noticed something just wasn’t right when I tried to rotate the cylinder. It felt stiff and awkward, almost like it was sticking, making it tough to load and unload the revolver properly. This is a big deal, folks. 

A cylinder problem is not just an inconvenience; it could be downright dangerous. 

In a high-stakes situation, a malfunctioning cylinder can be the difference between effective self-defense and not. It’s an issue that begs for a fix and pronto.


First things first, safety checks. Make sure your firearm is completely unloaded before you attempt any fixes. 

Then, I got to work disassembling the cylinder from the frame, following all safety protocols. I thoroughly cleaned it, paying special attention to the crane area and ejector. 

After that, a light lubrication did wonders. Reassembled it, and, would you believe it, the problem was gone! It’s amazing what a little TLC can do for your firearm. 

So, if you’re facing the same issue, I’d say give this solution a whirl. Just remember to stick to all the safety guidelines.

3. Jamming Barrel Issue

Alright, let’s tackle the jamming barrel issue. During my field tests, this problem really threw me off. I was at the range, getting into my groove, and boom, a jam. It’s an abrupt and jarring experience, let me tell you.

One minute, you’re practicing your aim, and the next, you’re wrestling with your firearm, trying to get it back into action. A jamming barrel is more than just an annoyance; it can put you at risk if you’re depending on your firearm for safety. 

Nobody wants to be stuck with a jammed barrel when it matters most.


So, how did I solve this issue? Well, first, I made sure the gun was safe and empty. Then, I gave the barrel a thorough cleaning. 

Seems simple, but a clean barrel is a happy barrel. I used a nylon brush and solvent to scrub away any residue or debris inside the barrel. Then, I applied a light coating of lubricant. Took it back to the range, and it was like night and day. 

No more jams, just smooth shooting. A thorough cleaning might do the trick if you’re dealing with a jamming barrel. Always remember, safety first!

4. Issue with the Grip

So, let’s dive into the issue with the grip. This might not seem like a huge problem, but it matters. When I was out in the field, I noticed that the grip wasn’t feeling quite right. It was somewhat uncomfortable, and I felt my hand straining a bit during extended use. 

And let’s be real; an uncomfortable grip is more than just an inconvenience. Your grip affects your aim, shooting stability, and overall performance. 

Even worse, if you’re in a situation where you need your firearm for personal safety, a poor grip could be a hindrance.


So, how did I address this? Well, I turned to aftermarket grips to find a better fit. There are many options out there, so I got one that better suited the size and contours of my hand. Once it was fitted, I returned to the field to test it.

 What a difference! My hand felt comfortable, the aim was stable, and the overall experience was just better. So, if you’re also grappling with grip issues, maybe look into aftermarket solutions. 

It’s a relatively simple fix but can improve your shooting experience. And as always, keep safety in mind when modifying your firearm.

Final Verdict

So, what’s the bottom line? The Smith and Wesson Model 60 Pro is a formidable firearm, no doubt about it. Its build quality and performance are generally solid. However, like anything in life, it’s not without its flaws. 

I’ve faced them all from misfiring issues to cylinder problems, jamming barrels, and grip discomfort during my field tests. The good news? Each problem has a solution.

A deep clean solves the misfiring, thorough cleaning and lubrication take care of cylinder and barrel issues, and a grip replacement can enhance your handling comfort and performance. 

Do these, and you’ll have a reliable tool that performs when you need it the most. Just remember, whether you’re a seasoned shooter or a newbie, always prioritize safety when handling firearms.


Is the S&W Model 60 still in production?

Yes, The S&W Model 60 is still in production.

What is the capacity of the Smith and Wesson Model 60?

The Smith and Wesson Model 60 has a 5-shot capacity and can be chambered in either .38 Special or .357 Magnum.

Is the Smith Model 60 a good gun?

Yes, it’s popular for its durability, accuracy, and versatility, making it a solid choice for various uses.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment