4 Most Common Ruger Security 380 Problems And How To Fix Them

The Ruger Security 380 is a popular choice for personal protection and self-defense, I’ve spent a good amount of time with the Ruger Security 380. it can have some issues. 

Some of the most common problems reported by users include firing failures, feeding issues, trigger sticking, and recoil spring problems​​. These issues can be frustrating, especially when you’re relying on your firearm for safety.

I’ll break down these common Ruger Security 380 Problems one by one and give you the rundown on how to fix them. 

Overview of the Problems & their Solutions

Top 4 Ruger Security 380 Problems & Solutions

1. Firing Failure

It’s frustrating when you pull the trigger, and nothing happens, right? I’ve been there. Out on the range, everything set, I pull the trigger and—nothing. Talk about a letdown. 

This could happen for several reasons. Bad primers are often the culprit, but sometimes, it could be due to a dirty firing pin or chamber. 

Even a small bit of grime can mess things up.

Solution

Now, onto the good stuff. How do we fix it? Well, first off, make sure your gun is unloaded. Safety comes first, always. Start by giving your firing pin and chamber a good clean. A cotton swab and some solvent should do the trick. 

Next, check your ammo. If you suspect bad primers, try a different batch. This has solved the issue for me more than once. Just these simple steps, and you can often quickly clear up the firing failures. 

So there you have it, a straightforward way to solve a not-so-fun problem.

2. Feeding Issue

Alright, next on the list is the ruger security 380 failure to feed.

You know, when the cartridge just won’t chamber properly. In my experience, this problem can really mess up your rhythm. 

I’ve been out on the field, aiming, ready to shoot, and then the bullet just won’t feed. It’s a snag you don’t want to deal with, especially when you’re counting on your firearm. 

Usually, this issue could be linked to dirty magazines or even the ammunition itself. Sometimes, the feed ramp might be the bad guy.

Solution

First things first, unload your gun. Then, start by cleaning your magazines. Some solvent and a soft brush should work well. Next, examine your feed ramp; a light polish might be in order. And don’t overlook the ammunition you’re using. 

Switching to a different brand often does wonders. I’ve tried all these steps myself, and they’ve resolved my feeding issues more than once. 

These aren’t complex solutions, but they’re effective. Just a bit of regular maintenance and being mindful of the ammo you’re using can go a long way.

3. Trigger Stuck

Let’s talk about a particularly annoying issue: a stuck trigger. Trust me, you don’t want to experience this. I was out at the range, got into position, took aim, squeezed the trigger, and felt resistance. Yep, the trigger was stuck. 

A stuck trigger can be dangerous if not addressed correctly and quickly. Usually, the problem is due to debris in the trigger assembly or maybe even some manufacturing residues that never got cleaned out.

Solution

Safety first, make sure the gun is unloaded. Then, you’re gonna want to open up the trigger assembly. A basic cleaning kit with some solvent should help remove any grit or grime. Just apply a few drops and then gently scrub with a brush. 

Reassemble and dry the fire a few times to check. In my experience, this has been sufficient to resolve the issue. If the problem persists, it’s time to consult a professional. 

Seriously, some problems need an expert’s touch. So there you have it, a simple yet effective solution for a sticky situation.

4. Problem with the Recoil Spring

Let’s move on to another issue: the recoil spring. Have you ever noticed your gun not cycling the way it should? I had this issue at the range once. 

Fired off a few rounds, and something felt off. The slide was sluggish, not returning to battery as it should. 

My gut told me it might be the recoil spring acting up. It’s a crucial part that often gets overlooked, but the entire firing cycle can get compromised when it starts to weaken or fail.

Solution

Now for the fix. Start by making sure your firearm is unloaded. Always safety first, folks. Then, go ahead and swap out that recoil spring. It’s a relatively simple process that doesn’t require too many tools or a degree in gunsmithing. 

Just follow your firearm’s manual for the disassembly and reassembly steps. In my case, changing the recoil spring made a world of difference. 

The gun cycled like new, and those frustrating issues were history. If you’re facing similar problems, a new recoil spring might be your quick and effective solution.

Final Verdict

Most of these problems have straightforward solutions. You’re back in action with a deep clean here, a spring swap there. 

These are not deal-breakers, merely challenges that are easily overcome with proper maintenance and care. Overall, it’s a reliable, effective choice for anyone seeking a concealable, easy-to-handle firearm. 

Just be prepared to invest time in upkeep and possibly switch out a few parts.

FAQ’s

Is the Ruger Security 380 reliable?

Yes, it’s dependable for personal protection when maintained properly.

Is Ruger Security 380 Hammer fired?

Yes, it’s a hammer-fired, single-action pistol.

Is Ruger 380 good for concealed carry?

Yes, its compact size makes it ideal for concealed carry.

What is the trigger pull on a Ruger Security 380?

The trigger pull is around 4 lbs. 7 oz., relatively light and smooth.