5 Common Remington 11 48 Problems And How To Fix Them

Last Update:

So, I recently had the chance to test the Remington 11-48 out in the field. Now, it’s a solid gun, let me tell you, but nothing’s perfect. During my time with it, I stumbled upon a few common Remington 11 48 Problems that most users seem to face.

The main headaches I ran into include an extractor issue, a jamming problem, the occasional misfiring, and some complications with the trigger assembly. Yikes! But don’t sweat it; I’ve got your back. We’re going to dive into each of these problems and, more importantly, how to solve them.

Bottom line? The goal here is simple: I want to help you get the best performance out of your Remington 11-48, without any fuss. Stay tuned, and let’s iron out those issues together.

Overview of the Problems & their Solutions

Extractor IssueClean regularly; replace bolt assembly components if necessary.
Jamming ProblemClean and oil the magazine tube; remove plastic buildup in the chamber.
Misfiring ProblemCheck for play in the hammer; clean or replace worn parts in the bolt link.
Issue with TriggerClean hammer’s sear notch; replace weak or damaged springs.

Top 4 Remington 11-48 Problems & Solutions

1. Extractor Issue

Alright, let’s get down to brass tacks. The extractor issue is a real doozy. In my field experience, this problem popped up faster than I would’ve liked. 

After around 40 shots, the extractor—or worse, the extractor and plunger—called it quits. It was frustrating, to say the least, and far too common for my comfort. It’s like driving a car that stalls at every red light; you start to lose faith.


Now, for the part you’ve been waiting for—the fix. Look, the extractor typically does its job unless it gets gunked up by rust or dirt. 

So first things first, keep it clean! For more severe issues, you may need new bolt assembly components. I went ahead and ordered some parts, not directly from Remington, but from a reliable online store that specializes in firearm parts and accessories. 

Swapping out the faulty pieces, everything clicked back into place. After the repair, the gun performed like a champ. So, make sure to check and replace your components when needed, and you should be good to go!

2. Jamming Problem

So, here’s another snag I hit—jamming. It’s as annoying as a mosquito buzzing in your ear while you’re trying to focus. 

About one out of four times, the spent shell would only half-leave the ejection port. 

It was like the gun couldn’t make up its mind: eject or not to eject? The jamming put a real damper on the experience; it’s tough to feel in control when you can’t rely on your weapon.


Now, let’s nip this problem in the bud. What’s usually the culprit? A gunked-up magazine tube or it dries out, messing with the friction ring. 

First off, wipe down that tube, give it a good clean. Then, a drop or two of oil can go a long way. It makes sure there’s just the right amount of friction so that your shotgun doesn’t slam during operation. And don’t forget about plastic buildup in the chamber.

I tried polishing it up and cleaning it with fine steel wool, and that did wonders. Keep these areas clean and lubricated, and your gun should function much smoother, trust me on this one.

3. Misfiring Problem

Next on the list is the misfiring issue, and let me tell you, it’s a buzzkill. Imagine this—you fire off 8 or 9 shells smoothly, and then, nothing. A snap but no bang. 

No indentation on the primer, either. The issue even has the audacity to get worse as the gun heats up. Press the trigger, and all you get is a faint click. 


So how did I tackle this? Time to play detective. My suspicion was that the hammer was bumping into the forks behind the bolt. 

I took apart the trigger group to give the hammer a good look. Sure enough, there was some sideways play. Now, here’s the fix—smooth out any rough spots inside the bolt link. 

And don’t forget to check the pin; it might be worn out or obstructed by some debris. Cleaning and replacing the bolt return spring, along with cleaning the tube in the stock, made a huge difference. It’s like the gun got a new lease on life.

4. Issue with the Trigger Assembly 

Okay, now we’re on to the trigger assembly, and this one’s a head-scratcher. Picture this—you shoot, the empty cartridge ejects, a new round loads, and then, nothing. The trigger’s dead. 

It won’t reset. Even weirder, the gun acts totally normal when you manually work it and dry-fire. 


Alright, so how do we whip this trigger assembly into shape? First, let’s talk about the hammer. It might not be engaging with the sear as it should. And, believe me, it’s super easy to mess up the trigger assembly while cleaning. 

Also, the spring maintaining the sear? It might be weaker than a soap bubble. So what did I do? Cleaned that hammer’s sear notch, made sure it was free of any gunk.

Checked if the notch was too shallow. Additionally, the carrier release needed some attention. It could be bent or just not engaging right. 

After taking apart the trigger assembly and doing some manual tests, I was able to spot the issue. A few spring replacements later, and voila, back in action!

Final Verdict

Let’s set the record straight. The Remington 11-48 is a classic. It’s got a strong build, reliable operation, and has been around long enough to prove its mettle. 

I encountered issues ranging from extractor problems and jamming to misfires and tricky trigger assembly situations. However, the silver lining is that none of these problems are deal-breakers. Most can be remedied with a bit of maintenance, cleaning, and maybe swapping out some worn parts. 

After addressing these concerns, the firearm performed significantly better. So, at the end of the day, is it worth it? Absolutely. 


What is the history of the Remington 11-48?

Introduced in 1948, it was a cost-effective variant of Model 11, sharing parts with Remington 870 pump, released in 1950.

Is a Remington Model 11 a good shotgun?

Yes, it’s been commercially successful and reliable for hunters since its introduction in 1905.

How many rounds does a Remington Model 11 hold?

The magazine holds four rounds, plus one in the chamber, totaling a five-round capacity.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment