4 Ruger American Ranch 300 Blackout Problems You Must Be Aware of

Last Update:

I recently spent quality time testing the Ruger American Ranch 300 Blackout. Don’t get me wrong, this is a decent firearm with many strong points. But after spending ample time in the field, I’ve noticed a few Ruger American Ranch 300 Blackout Problems that could use a little attention.

I encountered four main problems during my experience: feeding issues, failure to fire, magazine jamming, and trigger reset troubles. 

But don’t worry, I’m gonna lay down some effective solutions for each of these problems.

Overview of American Ranch 300 Blackout Problems

Feeding IssueCheck magazine seating, switch ammo brands, and lubricate feed ramp.
Failure To FireClean firing pin and chamber; try different ammo; consult manufacturer or a qualified gunsmith.
Magazine JammingClean magazine, replace weak spring, lubricate mag well.
Trigger Reset IssueDeep clean trigger assembly, replace worn-out trigger spring.

Top 4 American Ranch 300 Blackout Problems & Solutions

1. Feeding Issue

So, let’s get straight to it. The first issue I encountered while in the field was the feeding problem. You load up, take aim, pull the trigger, and—nothing. 

The bullet just doesn’t feed into the chamber like it should. Super frustrating, right? This issue can throw off your shooting experience and mess with your confidence. 

Even if it happens once, you’ll be on edge, wondering if it’ll happen again.


Now, here’s how I tackled this problem. First, check the magazine. Make sure it’s properly seated. If it is, and you’re still facing the issue, the next step is to look at the ammo. 

Believe it or not, sometimes switching to a different brand can make a difference. If those two don’t work, a good cleaning session might be worth considering. 

Make sure to properly lubricate the parts, paying special attention to the feed ramp. For me, trying different ammo and a thorough cleaning did the trick. Give it a shot, and it might also work for you.

2. Failure To Fire

Alright, onto the second issue: failure to fire. Picture this—you’re lined up, take your time to aim, and are all set to make that shot. 

You pull the trigger and hear a dull click instead of that satisfying bang. Talk about a letdown, huh? This happened to me a couple of times, and I have to say, it can really mess up the whole experience. 

You want reliability when you’re out shooting, and a failure to fire makes you question the firearm’s dependability.


So how do you fix this? The first thing I tried was inspecting the firing pin and the chamber. Sometimes, dirt or debris can get in the way. 

A simple clean-up job could be your solution right there. Check the ammunition to see if everything looks clean, but you’re still having issues. Bad primers can be sneaky culprits. Switch out the ammo to see if it makes a difference.

 Last resort? Consult the manufacturer or take it to a qualified gunsmith for a thorough inspection. For me, it was actually a combination of cleaning and changing my ammo that sorted things out. These are simple steps, but they can be real game-changers.

3. Magazine Jamming Problem

Okay, so the third issue to tackle is the magazine jamming problem. Let me tell you, there’s nothing more frustrating than a magazine that won’t cooperate. 

I was out there, ready to enjoy my time, when all of a sudden, the magazine just wouldn’t sit right or feed the ammo correctly. It was pretty disheartening, to say the least. 

I kept pulling it out, slapping it back in, but the darn thing just wouldn’t work smoothly. It’s especially aggravating when you’re in the middle of shooting, as it ruins your focus and rhythm.


Here’s what I did to get past this headache. The first step was to take out the magazine and give it a good look-over. 

A quick cleaning can sometimes fix it. Another thing to check is the magazine spring. If it seems weak or worn out, replacing it could solve your problem. Last but not least, sometimes the issue is with the mag well of the firearm itself.

A bit of lubrication there can do wonders. For me, a thorough cleaning of the magazine and a slight lube job on the mag did the trick. It’s amazing how small adjustments can lead to big improvements.

4. Trigger Reset Issue

Moving on to the last issue on our list: the trigger reset problem. I’ve got to say this is one of those issues that can really get under your skin. You take a shot, but then the trigger doesn’t reset properly for the next one. 

It kind of sticks or doesn’t fully return to its starting position. This isn’t just annoying; it also can mess with your shooting rhythm and overall experience. 

You don’t want to be wrestling with your trigger when you should be focusing on your aim.


Alright, let’s talk about solutions. The first thing to check is the trigger assembly. Sometimes, a little bit of gunk can build up in there, making it less responsive. 

A thorough cleaning might just solve your issue. If not, the next thing to look at is the trigger spring. A worn-out or weak spring can make the trigger sluggish. Replacing the spring isn’t too complicated and could get things back in working order. 

A combination of a deep clean and a new spring did wonders for me. Don’t underestimate the power of basic maintenance; it can make all the difference in your shooting experience.

Final Verdict

Alright, let’s sum things up. The Ruger American Ranch 300 Blackout is a solid firearm; there’s no doubt about it. It’s designed well and generally delivers what it promises. But, like anything else, it’s got some issues. 

The good news? These aren’t deal-breakers. Most problems like feeding issues, failure to fire, magazine jams, and trigger reset issues are manageable. 

With a bit of maintenance, part replacements, or even just a brand switch of your ammo, you can get it running smoothly as silk. 

All in all, I’d say if you’re willing to get to know this firearm, it won’t let you down.


How accurate is the Ruger American 300 Blackout?

It gives the best results with Frontier 125-grain FMJs; averages over 5 inches per group.

How accurate is a 300 Blackout rifle?

It maintains 2-inch or less groupings over 100 rounds.

How accurate is a 300 Blackout round?

Its max effective range through a 16” barrel is 460 meters.

What makes 300 Blackout so special?

It’s designed for shorter-range, suppressor-friendly use; higher energy than 7.62 Soviet.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment