6 Common Remington 710 Problems And How To Fix Them

Last Update:

Having tested the Remington 710 in the field, I’ve had hands-on experience with it. Don’t get me wrong; it’s a solid piece of equipment, but it’s far from perfect. While out hunting or at the shooting range, I stumbled upon a handful of issues that could use some attention.

I’ve encountered six common Remington 710 Problems from trigger issues to bolt stop problems and even accuracy concerns. 

I’m not just here to point out what’s wrong; I will also offer you some nifty solutions. 

The aim of this article is to guide you through these problems and offer some fixes. That way, your Remington 710 can be the reliable firearm it was designed to be. So let’s dive in, shall we?

Overview of Remington 710 Problems & their Solutions

Issue with TriggerReplace the factory trigger with a high-quality aftermarket one.
Bolt Stop IssueEnsure the bolt release lever is properly locked down.
Barrel ProblemSend the rifle back to Remington for a new gun or a refund.
Action ProblemConsider upgrading to a new rifle if the action becomes too stiff.
Ejection ProblemClean the rifle thoroughly and replace any worn-out parts.
Accuracy IssueSwap the factory stock for a high-quality aftermarket one.

Top 6 Remington 710 Problems & Solutions

1. Issue with the Trigger

Ah, the trigger; where do I even start? I felt something was off from my first outing with the Remington 710. 

The trigger is just too heavy, making the gun jerk a bit. Yeah, it’s that weird trembling sensation before you expect the shot to fire off. 

Oddly enough, the 710’s trigger is an electrical switch, so the term “sear” doesn’t even apply here. I mean, 

Remington’s been dealing with this issue since the ’70s! That’s old school, right? They even had recalls. You’d think they’d have it figured out by now.


Alright, let’s talk solutions. Don’t go messing with the factory trigger; you don’t want to void that warranty. I’ve heard some folks swapped out their triggers for something better. 

Trust me, don’t go for the “upgrade” Remington offers; it’s not worth it. What I did was replace the trigger with a high-quality aftermarket one. 

I’m not going to lie; it’s a bit pricey, but the difference is night and day. It’s an investment, sure, but one that’ll make your shooting experience a whole lot better.

2. Bolt Stop Issue

Ah, here’s another thorny issue: the bolt stop failures. The first time I had this happen, let me tell you, it was a bit of a shock. 

Picture this: you’re out in the field, and the bolt breaks off. Yup, that’s a common problem with the Remington 710. And if you’re thinking it’s just the bolt that’s problematic, think again. 

The bolt shroud isn’t any better; it can break without much effort. Plus, sometimes, the bolt’s front part won’t align with the rest of it. It’s not exactly confidence-inspiring when you’re trying to get that perfect shot.


Okay, let’s switch gears and talk about fixing this. The bolt release lever moves back to unlock and forward to lock. 

You’ll want to ensure it’s locked down; otherwise, it could get caught on something and snap immediately. And believe me, I’ve seen plenty of people make this mistake, especially after cleaning their guns. 

Slow it down a bit when you’re cycling the bolt. Don’t rush it; rushing can damage the shroud. Ever since I started taking these precautions, I’ve had zero issues with the bolt or its shroud. Simple fixes, really, but they make a world of difference.

3. Barrel Problem

Let’s talk barrels, shall we? The barrel is a critical part of any firearm, but with the Remington 710, it leaves much to be desired. 

You first notice that the barrel is hydraulically pressed into the receiver. Sounds good on paper, but the fit? Oh man, it’s downright terrible. 

The barrel is only partially seated, which just feels wrong. And get this: a single screw on the magazine’s front and another one on the stock are all that hold this essential piece in place.


Alright, let’s talk fixes. Now, it’s pretty clear that the barrel’s poor fit is a manufacturing issue. So, what’s the best course of action? Simple. Send the gun back to Remington. 

That’s right. They’ll either give you a new gun or offer a refund. Sure, it’s a bit of a hassle, but it’s the most effective solution I’ve found. 

I’ve considered trying to “make do,” but at the end of the day, this is a flaw that you can’t work around. When I sent mine back, Remington sorted it out, and that put an end to my barrel woes.

4. Action Problem

Okay, let’s tackle another biggie: the action problems. You’ll start to feel this after you’ve been firing a lot of rounds, especially if you’re using some of that inexpensive ammo like Federal American Eagle 155gr FMJ. 

After 400-500 rounds, you’ll probably notice the action getting a bit, well, sticky. You might even find the action freezing up entirely every couple of boxes. 

Trust me, it’s a headache when that bolt just won’t open, and it’s a surefire way to ruin your shooting experience.


So, what’s the fix for this one? Unfortunately, it’s not as easy as you’d hope. The soft rails of the action tend to gouge quickly, making the whole thing incredibly stiff and rough. 

It’s a design flaw that you can’t easily remedy with a simple tweak or a new part. So, what did I do? I ended up getting a new rifle. 

It’s a drastic move, but sometimes that’s what it takes. In my eyes, the Remington 710 turns out to be more of an entry-level, throwaway kind of gun, and if you’re serious about your shooting, it might be time to upgrade.

5. Ejection Problem

Let’s chat about one of the most annoying problems you might face: Failure to Eject (FTE). I’ve been through this, and it’s not fun when you’re trying to have a good day at the range. 

The culprit? A dirty or worn-out extractor. This part is supposed to kick out that spent shell casing. But it can’t do its job if it gets clogged or wears down. 

Oh, and there’s another thing to keep an eye on—the bolt lock. If it’s too tight, the extractor’s not going to get that casing out of there, either.


Okay, so how did I tackle this issue? Well, it all starts with a good cleaning. You’ve got to strip down the rifle completely to get a look at everything. 

Once you’ve removed all the necessary parts, like the magazine box, trigger guard, and so on, you can start the detective work. Check each component for any wear and tear, especially rust or burring. 

If you spot anything, it’s replacement time. It’s a bit tedious, but it’s better than dealing with FTEs every time you shoot. It took me a while, but once I replaced the worn-out parts, the FTE problem was history.

6. Accuracy Issue

Oh boy, let’s get into something that really gets to you: poor accuracy. You line up that perfect shot, and then the bullet’s nowhere near where you aimed. It’s enough to make you want to toss the whole thing into a lake. 

Look, the Remington 710 has its issues. The stock is shoddy, the action bedding is problematic, and let’s not even start on the low-quality barrel. 

The bolt system? It’s got design flaws that mess up the headspace and give you bigger shot groups. And don’t get me started on the heavy, creep-ridden factory trigger.


Alright, so how did I manage to fix this headache of an issue? The first thing I did was say goodbye to the factory stock. I swapped it out for a high-quality one, like something from Bell & Carlson or Hogue.

It’s a pretty straightforward change, and it made a world of difference. The new stock was way more rigid, reducing all that annoying flex and torque. 

After that, my shot groups started to tighten up quite a bit. If you’re stuck with poor accuracy, upgrading the stock is a good first step. You won’t regret it.

Final Verdict

Alright, let’s sum this all up. The Remington 710 has its merits, but it’s far from flawless. For the novice shooter or hunter, this gun might be a decent starting point because of its moderate price and included features like a synthetic stock and mounted scope. 

But let’s not kid ourselves; you’re likely to run into some issues. Whether it’s trigger woes, bolt mishaps, barrel fits, action stickiness, or ejection challenges, be prepared to get your hands dirty or even consider alternatives. 

The good news? Most of these issues can be tackled head-on with some patience and a willingness to invest in quality aftermarket parts. My field tests show that this gun can be a reliable partner in your shooting endeavors with the right adjustments.


Is the Remington 710 a good gun? 

It’s an adequate option for beginners due to its moderate price and included features.

What is the barrel twist rate of a Remington 710? 

The twist rate is 1 in 10 inches with an overall length of 42 inches.

What barrel twist rate is faster? 

A lower number signifies a faster twist rate; a 1:9″ twist is faster than a 1:10″ twist.

How long is a Remington 710? 

The barrel is 22 inches, and the overall length is 42 inches.

Where is Remington 710 made? 

It’s manufactured in Mayfield, KY.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment