I’ve spent some quality time out in the field with the Mossberg MVP Scout, and let me tell you, it’s not without its issues.
The problems I’ve come across range from a stiff bolt to magazine release issues, light primer strikes, a heavy trigger, and even cartridge feeding issues. But don’t worry, I won’t leave you hanging! I’m here to not only highlight these problems but also offer some solid solutions to get your MVP Scout running smoother than ever.
I want to guide you through these common problems and help you fix them, making your time at the range or out in the field as enjoyable as possible.
Overview of Mossberg MVP Scout Problems & their Solutions
| Mossberg MVP Scout Problems | Solutions |
| Stiff Bolt | Keep firing more rounds; the bolt will loosen up. |
| Magazine Release Issue | Perform light milling or sanding on the slide. |
| Light Primer Strikes | Inspect and adjust the firing pin. |
| Heavy Trigger | Adjust the trigger pull weight per manual. |
| Cartridge Feeding Issue | Clean and lubricate the feed ramp and check the magazine. |
Top 5 Mossberg MVP Scout Problems & Solutions
1. Stiff Bolt
So, let’s kick things off with that pesky stiff bolt, shall we? When I first took my Mossberg MVP Scout out to the range, I noticed something that really bugged me.
The bolt felt stiff and a bit gritty, especially during the first 50-100 rounds. Honestly, it made cycling rounds a bit of a chore. You don’t want to be struggling with a stiff bolt when you’re in the field, focused on your shot.
Solution
As I kept firing more rounds, I found that the bolt started to loosen up. It
seems that the stiffness tends to wear off naturally over time.
After surpassing the 100-round mark, the action got noticeably smoother. So, if you’re experiencing this issue, hang in there.
Just keep firing more rounds, and it should improve. Trust me, it gets better, making your shooting experience much more enjoyable in the long run.
2. Magazine Release Issue
Alright, let’s move on to the next issue: the magazine release. Now, I was out there, getting my aim just right when, bam, the magazine fell right out!
It’s definitely not something you want happening in the middle of a session. It’s distracting and frustrating, to say the least. I noticed that the slide was hitting the magazine during cycling, essentially forcing it out.
This issue seemed to be related to bad tolerances, which can be a serious pain when you’re trying to maintain focus.
Solution
What needs to be done is some light milling or sanding on the slide to get the tolerances just right. After making these adjustments, I tested it out thoroughly. It did the trick.
The magazine stayed in place, and the shooting went a lot smoother. If you’re facing a similar problem, this is your best bet. Be cautious and take your time while doing this, or consult a professional to get it done right.
Either way, it’s a solvable issue that’ll make your future shooting experiences a lot less aggravating.
3. Light Primer Strikes
Okay, next up: light primer strikes. I’m sure you’ll agree; nothing takes the wind out of your sails like pulling the trigger and hearing that dreaded “click” instead of a “bang.”
Yep, I faced this issue more than once while testing the Mossberg MVP Scout in the field. Pulling the trigger only to find out that the primer didn’t ignite is frustrating and can throw off your whole shooting rhythm. After doing some sleuthing, I found that the firing pin might be the culprit.
Solution
Well, first things first, let’s check that firing pin. I did just that and noticed it was protruding a bit too far. Now, the firing pin’s position is crucial for the gun to function correctly.
If it’s not set right, it won’t hit the primer with enough force, causing those light primer strikes. So, give it a thorough inspection, and if needed, adjust the firing pin so it sits where it should.
It’s a pretty straightforward fix, and it made a world of difference in my case. Just take your time, and if you’re not comfortable doing it yourself, get a professional to sort it out for you.
4. Heavy Trigger
Moving along, let’s talk about the heavy trigger issue. This one really got to me when I was testing the Mossberg MVP Scout. A heavy trigger can seriously mess with your accuracy and make longer shooting sessions feel like a workout.
You’re out there, focused, aiming, and then you have to pull this unreasonably heavy trigger. Not fun, right? It’s a problem that can make even an experienced shooter pause and re-evaluate their technique.
Solution
After doing some research, I decided to adjust the trigger pull weight. I’ve tested this solution, and I can attest that it made a noticeable difference in my shooting experience.
You can either do this yourself by following the firearm manual’s guidelines or, if you’re not comfortable tinkering around with the internals, consult a gunsmith.
If you go the DIY route, be sure to follow all safety precautions and do it step-by-step to avoid any mishaps. It’s a game changer, and it’ll make your time with the Mossberg MVP Scout far more enjoyable.
5. Cartridge Feeding Issue
Last but certainly not least, let’s tackle the cartridge feeding issue. Now, I was out in the field, getting all settled in for a good session, and guess what happened? That’s right, the cartridge just wouldn’t feed properly into the chamber.
But after some more tries, it becomes clear: there’s definitely an issue with the firearm itself.
Solution
I took a close look and did a little bit of research. Turned out, the issue often lies in the magazine or the feed ramp. So, I decided to clean and lubricate the feed ramp first and also checked the magazine for any obvious deformities.
After doing this, the feeding issue seemed to disappear. If you encounter this problem, start with these simple steps. If that doesn’t fix it, you might need to dig a bit deeper or consult a professional.
But in my case, a good, clean, and thorough check did wonders. So, give it a try, and you’ll likely see an improvement.
Final Verdict
Alright, folks, there you have it. I’ve given the Mossberg MVP Scout a real run for its money, and it’s a solid firearm with a lot to offer. But hey, no piece of equipment is without its shortcomings, and this one’s no exception.
Whether it’s a stiff bolt, a magazine that just doesn’t want to stay put, or light primer strikes, these issues can make your shooting experience less than ideal. However, and this is key, none of these issues are deal-breakers.
Each one has a solution, some easier than others, but all manageable. Once you’ve tackled these, what you’re left with is a reliable, versatile rifle that performs well in the field and at the range.
So, if you’re in the market for a firearm that you can fine-tune to meet your specific needs, the Mossberg MVP Scout just might be the one for you.
FAQ’s
What are the different versions of the Mossberg MVP?
There are multiple versions including MVP LR, MVP Patrol Rifle, MVP Scout Rifle, and MVP Scout Rifle Scoped Combo, varying mainly in caliber and price.
What is the twist rate of the Mossberg MVP?
The twist rate is 1 in 9 inches.
What does Mossberg MVP stand for?
MVP stands for Mossberg Varmint Predator, and it comes with various options and stock styles.
What magazine does the Mossberg MVP take?
The Mossberg MVP can accept/feed from standard AR-10 style as well as M1A/M14 style magazines.
