I have recently had the opportunity to test the Taurus Raging Bull 454 problems out in the field. I was excited to put this gun through its paces, but certain issues became apparent as I began to use it.
During my field tests, I came across four main issues with this firearm. These included cylinder jamming, extraction problems, trigger issues, and cycling concerns.
This article will discuss these problems in detail, breaking down what I found and how these issues might impact the user experience and provide practical solutions.
Overview of the Problems & their Solutions
| Problems | Solutions |
| Cylinder Jamming | Inspect and adjust pin, hole, or cylinder alignment. |
| Problem with Ejection | Hone chamber back to parallel; keep cylinders dry. |
| Trigger Issue | Clean, lubricate, and file any sharp edges inside the gun. |
| Cycling Issue | Manually turn the cylinder, try different ammo, clean buildup. |
4 Taurus Raging Bull 454 Problems & Solutions
1. Cylinder Jamming Problem
I frequently found ourselves in the field grappling with the cylinder jamming, especially when shooting single action.
At times, the hammer refused to pull back to the cocked position, leaving me in a bit of a bind. Sometimes, shaking the gun would resolve the issue, while other times, opening the cylinder was the only way to move forward.
I knew right away that something wasn’t quite right, and it seemed related to a tight cylinder, possibly involving a pin or pinhole.
Solution
After encountering this problem, I was determined to get to the bottom of it. Upon close examination, I noticed the cylinder was indeed tight. I concluded that it could be due to a worn hole, a worn pin, or even a bent pin.
By inspecting these components and making the necessary adjustments, the jamming issue was resolved. In my experience, keeping an eye on these specific parts and ensuring they are in good condition will prevent the problem from recurring.
It was a simple fix, but it made a world of difference in the overall performance of the firearm.
2. Problem with the Ejection
During my rigorous testing of the Taurus Raging Bull revolver, I stumbled upon a persistent ejecting problem. Whenever I fired the gun, the used case refused to come out on its own and had to be manually driven out.
This was a major hurdle, particularly when I was practicing targets at the range. My initial observation led me to believe that the problem was likely linked to undersized chambers.
It became clear that this was more than just a random issue; it was a consistent problem that needed a solution.
Solution
I realized that the fix for this ejecting issue was straightforward. I found that the chamber needed to be honed back to parallel to remove any roughness and to make it slightly larger.
This could be done by a local gunsmith or by sending the revolver to Taurus. Additionally, ensuring that the cylinders were completely free of any lube oil was crucial.
When everything was bone dry, the used shell stopped sticking. Following these steps resolved the problem and made the shooting experience much more enjoyable. I learned that sometimes, a simple adjustment can make a big difference.
3. Trigger Issue
During my extensive field testing, I ran into a situation that might sound all too familiar to some users of the Raging Bull 454.
Imagine firing several rounds at a shooting range, and then, without warning, the trigger refuses to pull. It was a frustrating experience and one that could be downright dangerous in more critical circumstances.
Our investigation showed that the problem was rare, but when it did occur, it seemed related to dirt buildup or sharp edges in the gun’s internal parts.
Solution
I discovered a quick fix for the jammed trigger problem in the heat of the moment. By keeping the barrel down for safety and wiggling the cylinder slightly while shaking the gun, I was able to get it to fire after a few attempts.
This temporary solution worked, but I wanted a more permanent fix. I found that by completely disassembling the gun, cleaning, and lubricating it thoroughly, I could address the root of the problem.
I inspected all parts for sharp edges and filed them slightly without changing the dimension. This resolved the issue entirely, allowing me to enjoy smooth, uninterrupted shooting again.
4. Cycling Issue
In my time spent with the Taurus Raging Bull 454, I encountered an annoying cycling issue where the entire action would get locked up periodically.
This inconsistency didn’t happen to all of me with the same frequency, but it tended to occur when attempting to pull the trigger for double action or cocked back the gun’s hammer.
Our examination suggested that improperly seated primers, known as high primers, might be the culprit.
Another theory was that the shell could be pulled forward, binding the cylinder and causing the cycling problem, particularly with powerful rounds.
Solution
I found a temporary fix by manually turning the cylinder, allowing me to close the action and continue cycling.
Experimenting with different ammo types also showed promising results. But I removed the cylinder for a more lasting solution and checked for any buildup, giving it a good scrub.
Ensuring that the ejector did not have buildup inside the cylinder also helped. By tackling the problem from these angles, I managed to put the cycling issue behind us, restoring the firearm’s performance and my confidence in it.
Conclusion
The Taurus Raging Bull 454, despite its robust build and impressive capabilities, does not come without its challenges.
I encountered various obstacles from cylinder jamming to extraction problems, trigger issues, and cycling concerns during my rigorous field testing. However, it’s essential to recognize that each of these problems has feasible solutions.
Whether it was a matter of careful inspection, cleaning, lubrication, or simply changing the ammunition, I found ways to overcome these difficulties.
FAQs
How many rounds does a Taurus raging bull hold?
The Taurus Raging Bull holds six .44 Remington Magnum Rounds.
What is the difference between the Taurus Raging Bull and the Raging Hunter?
The differences include weight, with the Raging Hunter weighing half a pound less than the Raging Bull, making the Hunter more practical in the field.
Does Taurus make a 454 Casull?
Yes, 454 Casull models are available and are currently shipping to dealers nationwide.
