5 Taurus 605 Problems You Must Be Aware of

Last Update:

I have been able to test the Taurus 605 firearm in various field conditions. Over time, I’ve realized that while the revolver showcases some fine features, it’s also not without its share of problems. 

During my testing, I encountered several common Taurus 605 Problems. Some main issues include cylinder locking problems, trigger issues, issues with the forcing cone, problems with cocking, and firing problems. 

In this article, I’ll delve into these problems in detail and provide practical solutions that might help users overcome these challenges. 

Overview of the Problems & their Solutions

Cylinder LockingReplace defective spring or take to gunsmith; tighten push rod.
Trigger IssuesClean forcing cone and front of cylinder; light oiling of internals.
Issues with Forcing ConeTake to a skilled gunsmith; use correct ammunition.
Problems with CockingClean, replace weak springs or worn parts; reassemble.
Firing ProblemsCheck ammunition quality; clean firing pin and hammer spring.

Top 5 Taurus 605 Problems & Solutions

1. Cylinder Locking Problems

During my time in the field, I often came across a recurring issue with the Taurus 605 – the cylinder wouldn’t stay locked. 

This problem seemed to be everywhere! It would either be a defective spring or screw or sometimes, the push rod wouldn’t be tightened enough. I even found instances where the cylinder’s locking pin was missing.

 It was indeed frustrating, particularly when precision was crucial. It felt like an obstacle constantly getting in the way of a smooth experience.


Solving this was a bit of a process but manageable. I followed the manual to remove the cylinder and then used a screwdriver to remove the defective spring. 

Installing a new spring did the trick most times. For those who aren’t skilled enough to do this, taking it to the gunsmith or sending it back to Taurus would be an effective solution. 

My hands-on approach helped me understand the nuances of this problem and gave me confidence in resolving it Myself.

2. Trigger Issues

During my trials, I noticed something troubling. After firing a few shots, the trigger would jam, even in safety mode. This was both alarming and perplexing. 

The issue seemed to pop up only after a brief firing and was linked to the narrow cylinder gap and accumulated powder residue on the cylinder’s face. 

Lack of cleaning or improper lubrication often rendered the revolver useless when the trigger failed.


The fix wasn’t too complicated. If the issue was due to a small cylinder gap, I found that simply wiping off the front of the cylinder and the forcing cone with an old cloth often did the trick. 

Regular inspection, cleaning, and applying a light coat of oil to the internal parts, including the trigger mechanism, became part of my routine. 

These solutions were practical and effective, turning a frustrating problem into an easily manageable one.

3. Issues with the Forcing Cone

In my field testing, I encountered a serious issue with the forcing cone, an area often prone to breaking. 

I discovered that it might not be in its correct spot, or worse, it could be fractured. Starting off undersized, the problem quickly escalated, and if not addressed, it had the potential to cause an accident. 

Regular wear and tear, excessive pressure from the bullets, or even rust and fouling led to difficulty in firing and poor accuracy.


Once I identified the problem, I knew that professional intervention was necessary. Taking it to a skilled gunsmith, who reamed the forcing cone using specialized tools, and restored it to its original shape. 

I also learned to choose the right ammunition, reducing the pressure on the forcing cone. 

These fixes were not just effective but essential in maintaining the safety and functionality of the firearm.

4. Problems with Cocking 

During my field trials, I ran into a nagging issue with the Taurus 605 model – difficult cocking. It became apparent that the hindrance in the cooking process was negatively affecting my shots’ accuracy. 

Upon inspection, I found that the culprits were excess buildup of dirt and debris, weak springs causing slow or no cylinder rotation, and worn-out parts like the hand or pawl.

The result was a frustrating experience that was far from ideal.


To tackle this problem, I went through a process of disassembling the revolver to access the critical areas. 

I thoroughly cleaned it using solvents, replacing weak springs and damaged parts as needed. The cleaning eliminated friction, and the replacements ensured smooth operation. 

Once reassembled, the revolver’s cocking became effortless, and my shots were back on target. A simple yet vital fix brought the firearm back to optimal performance.

5. Firing Problems

While testing firearms in the field, I encountered a recurring issue that interrupted my work: misfires. 

These weren’t mere annoyances; they completely disrupted my accuracy and reliability tests. The problem seemed to stem from various sources, such as faulty ammunition, a clogged firing pin, a worn-out hammer spring, or improper lubrication. 

The frustration grew as these misfires became a regular occurrence.


I knew I had to act quickly. My solution involved thoroughly examining the ammunition, ensuring it was neither stale nor of low quality. Next, I focused on cleaning the firearm, paying particular attention to the firing pin and hammer spring, and replacing them if necessary. Proper lubrication was also crucial. 

After these steps, the misfires ceased, and the firearms performed up to expectations. It was an enlightening experience and highlighted the importance of regular maintenance and high-quality ammunition.


The Taurus 605, despite its flaws, has potential. my extensive testing in the field brought me face-to-face with some significant issues, ranging from cylinder locking to firing problems. 

While these issues were indeed a hindrance, what impressed me were the solutions that could be applied with a bit of know-how and care. 

It might not be perfect, but it is manageable and modifiable to one’s needs. For those who value both affordability and the challenge of hands-on maintenance, the Taurus 605 could be a suitable choice. 


Is the Taurus 605 Poly a good gun? 

Yes, the Taurus 605 Poly Protector is a good choice for someone wanting a light, modern, 5-shot snub-nose, despite a long and heavy trigger pull.

Are Taurus revolvers good quality? 

Taurus has had quality control issues in the past, but those issues are improving. They are a value-minded option, being cheaper than competing brands.

Is there safety on a Taurus 605?

Yes, a transfer bar safety on the Taurus 605 prevents the gun from firing without fully pulling the hammer back.

When was the Taurus 605 made? 

The Taurus 605 was made in 1995.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment