5 Most Common Ruger SR9C Problems And How To Fix

Last Update:

I’m here to share some of my hands-on experience with the Ruger SR9C. I’ve had the chance to test this compact pistol out in the field, and while it’s a solid firearm for the most part, it’s not without its issues. 

I’ve run into a few Ruger SR9C Problems that I think are worth mentioning. These include extraction issues, feeding problems, failures to eject, trigger complications, and the ever-annoying stovepiping problem.

Don’t worry, though; it’s not all doom and gloom! I will break down each of these issues for you, dive into what might be causing them, and offer some practical solutions.

Overview of Ruger SR9C Problems & their Solutions

ProblemsSolutions
Extraction IssueKeep arm rigid when firing, possibly replace recoil spring.
Feeding IssueSwap stock magazine, polish and lubricate feed ramp.
Failure To EjectClean thoroughly, lubricate ejector and extractor.
Trigger ProblemClean behind trigger bar, consider trigger group replacement.
StovepipingUse Tap, Rack, and Assess technique, solidify grip.
Feeding ProblemReplace stock magazine, polish feed ramp, replace recoil spring.

Top 6 Ruger SR9C Problems & Solutions

1. Extraction Issue

Alright, so first up, let’s talk about the extraction issue. Trust me, it’s a pain in the neck. You fire a round and expect the empty case to be ejected smoothly, right? But nope, it clings to the chamber.

This happened to me a few times, and it’s a quick way to ruin your shooting experience. A failure to extract often means the slide or bolt moves back, but the empty case stays put, ruining the cycling process.

Solution

Okay, so here’s what I found works for me. You’ve got to keep that arm rigid when you’re firing; otherwise, you’re inviting this issue. Why? These SR series pistols can be easy to limp wrist. 

The recoil springs in these guns are pretty strong, absorbing a lot of the recoil. That’s good, but it can also trick you into easing up your grip, causing the slide not to cycle properly. 

If this issue keeps returning like a bad habit, you might need to replace the recoil spring. That did the trick for me.

2. Feeding Issue

So, moving on to the next annoyance: the feeding issue. In my experience, the gun sometimes gets stage fright and refuses to feed the next round. 

It could be a magazine problem, a funky feed ramp, or even the recoil spring messing with you. This is an issue, especially when you’re just getting to know your SR9c, aka the “break-in season.”

Solution

Here’s the deal: I started by swapping out the stock magazine. And guess what? It was like a whole new world. 

Stock magazines have a bit of a reputation for causing these feeding issues, so a replacement can make a difference. If the magazine isn’t the culprit, check the feed ramp. 

I spent some quality time polishing and lubricating that bad boy, which made things much smoother. And if none of that does the trick, get yourself a new recoil spring. 

3. Failure To Eject

Ah, the failure to eject issue. Trust me, it’s as frustrating as it sounds. Imagine this—you pull the trigger, the gun goes “bang,” but then, the empty cartridge doesn’t get ejected. 

Yeah, talk about a mood killer, right? This happened to me a couple of times, and it’s not something you want to deal with, especially if you’re relying on quick, successive shots.

Solution

So here’s what I did to tackle this problem. It may sound rudimentary, but a thorough cleaning did wonders. Turns out, debris and fouling in the chamber or ejection port can sometimes be the secret culprits. 

I also scrutinized the ejector and the extractor. A bit of lubrication and some minor adjustments worked like a charm. 

If you try all of this and still run into issues, it might be time to consult a professional or consider part replacements.

4. Trigger Problem

Okay, let’s tackle another sticky issue: the trigger problem. Man, this one’s a headache! You pull the trigger and expect a reset for the next shot, but nothing.

The trigger just lays there. For a trigger to not reset on its own? Major no-no. It happened to me a few times, and I had to manually push it back into position each time. 

Not ideal, especially if you’re in a situation that requires quick action.

Solution

So, what did I do to fix this? First off, a good clean-up is essential. Pay special attention to the area behind the trigger bar. 

If that doesn’t work, and you’re sure you haven’t messed up the trigger bar’s angle by forcing the slide off, a replacement might be in order. 

Replacing the entire trigger group and trigger disconnect bar did wonders for me. It’s like giving your gun a fresh start.

5. Stovepiping Problem

Next up on our list is the dreaded stovepiping issue. Let’s be real: when this happens, it’s super annoying. The empty shell casing gets stuck and doesn’t leave the chamber. Yeah, you heard that right. 

It messes up your flow, and, honestly, it’s a tad embarrassing.

Solution

Alright, here’s how I tackled it. The Tap, Rack, and Assess technique is golden. A firm tap on the 

magazine, a quick rack of the slide to usher in a new round, and a downrange assessment had me back in business. 

Another thing, the grip is key; if you’re limp-wristing, you’re inviting stovepipes. Make sure your grip is solid. Routine cleaning and oiling are also must-dos. 

If you’ve tried everything and it’s still happening, look into the ammo you’re using. Handloads can be tricky and are often the hidden troublemakers here.

6. Feeding Problem

Ah, the notorious FTF—Failure to Feed. This issue is as pesky as they come. Picture me out in the field, and bam, the gun just refuses to feed the next round. 

That’s the kind of interruption no one needs, right? What makes it worse is that this problem seems common, especially with stock magazines.

Solution

Here’s the deal: the first thing I did was swap out the stock magazine. And you know what? It made a difference. If that doesn’t solve your problem, the next thing to look at is the feed ramp. 

A little polish and some good ol’ lubrication can do wonders. Seriously, it’s that simple. Still, facing issues? Well, it’s time to replace the recoil spring. It’s an easy fix and should nip the issue in the bud.

Final Verdict

Alright, let’s sum this up. The Ruger SR9C is a pretty darn good gun, but like anything in life, it’s got its ups and downs. I’ve taken this gun through the wringer and encountered various issues, from feeding problems to extraction woes. 

Now, the good news is none of these problems are unfixable. With a little care and some basic troubleshooting, you can get this gun back in tip-top shape. 

It’s reliable for the most part and certainly does the job, but it won’t give you a flawless experience straight out of the box. 

So, if you’re willing to invest some time and a bit of elbow grease, you can have a dependable firearm that serves you well.

FAQs

Why did Ruger discontinue the SR9c?

Discontinued in 2017 to focus on higher-end Ruger American Pistol and cheaper Ruger Security-9.

Is Ruger SR9c a good carry gun?

Yes, ideal for concealed carry with a 3.4-inch barrel.

What does Ruger SR9c stand for?

The “C” stands for compact; it’s a striker-fired 9mm semi-automatic pistol.

Are Ruger 9mm a good gun?

Yes, reliable and accurate, good for concealed carry or home defense.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author

AUTHOR

I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment