4 Common Mossberg 715P Problems And How To Fix Them

Last Update:

I got my hands on the Mossberg 715P and took it out for field testing. I was thrilled at first, and don’t get me wrong, there’s a lot to like about this firearm. But I ran into a couple of issues you should know about.

There were four common problems: jamming, feeding issues, magazine difficulties, and bolt troubles. 

My goal here is to help you understand these issues and give you some practical solutions to keep your Mossberg 715P running smoothly. 

Overview of Mossberg 715P Problems & their Solutions

Mossberg 715P ProblemsSolutions
JammingClean the chamber and feed ramp; switch to high-quality ammo.
Feeding ProblemsProperly align rounds in the magazine; polish the feed ramp.
Problems with the MagazineClean and inspect magazine well; use a high-quality aftermarket magazine.
Bolt IssueDisassemble, clean, and lubricate the bolt; adjust guide rails.

Top 4 Mossberg 715P Problems & Solutions

1. Jamming Problem  

Ah, jamming. This is a problem I encountered more often than I’d like while out on the range. Let me tell you, it’s annoying when you’re all set to take a shot, and the gun just decides not to cooperate.

It happened when I was firing multiple rounds in quick succession. I even noticed it when my shooting pace was relatively slow. 

So, yeah, this issue isn’t something you can simply ignore. It interrupts the flow, breaks your focus, and, frankly, can be unsafe if you’re not careful.


So what did I do? First, I thoroughly cleaned the gun, especially the chamber and the feed ramp, to ensure no built-up grime was causing the issue. 

But the key change was switching ammo. I started using high-quality, factory-produced rounds instead of the cheap stuff. Boy, what a difference! The jamming incidents dropped dramatically. I also made it a point to regularly lubricate the moving parts. 

Trust me, it’s like giving your car an oil change; it just runs better afterward. These are simple things you can do, and they made a world of difference for me.

2. Feeding Problem

The next issue I ran into was the feeding problem. Yeah, you know, when the round doesn’t properly feed into the chamber. 

Super frustrating, right? I noticed that this issue usually happened right after loading a new magazine. 

The first shot would often misfeed, leading to a hang-up. Sometimes, it even happened midway through the mag. This is more than just a minor inconvenience; it’s something that can mess with your confidence while shooting.


Now, how did I tackle this problem? The solution turned out to be twofold. First, I paid attention to how I was loading the magazine. 

I made sure that the rounds were properly aligned and seated flat in the mag. Seems trivial, but it matters. Next, I inspected the feed ramp for any signs of wear or damage. Luckily, mine was in decent shape, but a quick polish certainly didn’t hurt. 

By taking these two steps, the feeding problem was significantly reduced. I also found that using higher-quality magazines made a difference. 

If you’ve been dealing with this issue, try these solutions. They worked for me, and they might just work for you too.

3. Problem with the Magazine

So let’s talk about the next issue, which is magazine problems. You can’t overlook this one; the magazine is like the heart of any semi-automatic firearm. 

When I was at the range, I noticed that my Mossberg 715P wasn’t properly locking the magazine in place. At first, I thought maybe it was a fluke, but then it kept happening. 

That caused rounds to misfeed, and let me tell you, it felt like the gun was fighting me the whole time. It’s like having a car that randomly decides it doesn’t want the gas you’re putting in it.


Alright, so how did I go about solving this issue? First, I closely inspected the magazine catch and the magazine well for any signs of wear, debris, or damage.

I then gave them both a good clean. Here’s the crucial part: I replaced the stock magazine with a higher-quality aftermarket one. 

It wasn’t the cheapest solution, but it was the most effective. From that point on, the magazine locked in place reliably, and the misfeeds were practically gone. 

I mean, if the heart of your gun isn’t working right, sometimes you just have to go for a transplant, right? These steps took care of the problem for me.

4. Bolt Issue

Now, onto the final issue that I encountered: the bolt. This might sound like a small part, but it plays a big role in the smooth operation of the gun. 

The problem was that the bolt wouldn’t go fully into battery, meaning it wouldn’t fully close and lock into place. This happened multiple times while I was out in the field, and let me tell you, it’s a safety concern, not just an annoyance. 

The bolt needs to be properly seated to ensure accurate and safe firing.


So, how did I tackle this bolt issue? Step one was disassembling the bolt and giving it a thorough clean. You’d be surprised how much grime can build up in there. 

After that, I inspected the bolt for any signs of wear or deformity. Finding none, I moved on to lubricating it well. Now, the part that really made a difference was adjusting the bolt’s guide rails to ensure they were aligned correctly. 

This might sound like a job for a gunsmith, but it’s actually something you can do yourself if you’re cautious and follow proper guidelines. 

After these steps, the bolt started behaving like it should: smoothly and reliably. So, if you’ve been wrestling with bolt issues, try this solution. It made all the difference for me.

Final Verdict

Look, the Mossberg 715P has a lot going for it. It’s lightweight, easy to handle, and for the most part, it’s pretty reliable. 

But no firearm is perfect, and the 715P has its share of issues. I’ve seen everything from jamming to feeding problems to magazine and even bolt issues. The good news? Most of these problems have practical, straightforward solutions. 

A deep clean here, a magazine swap there, and your firearm could be as good as new. So, while these issues were definitely frustrating, they weren’t deal-breakers. Just consider them bumps in the road.

With some simple fixes, this gun can be a solid choice for both beginners and seasoned shooters.


What magazines fit a Mossberg 715P?

The Mossberg International 715 25-Round Magazine fits the Mossberg 715P.

Is a Mossberg 715P automatic?

The Mossberg 715P is a rimfire semi-automatic pistol, ideal for small game hunting and target shooting.

Can I shoot steel shot in my Mossberg?

Steel shot can be used in barrels with an interchangeable Accu-Choke or Accu-Mag system only.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment