I’ve spent a good amount of time out in the field testing the Remington 3200. As much as I wanted to fall in love with this classic shotgun, there were a couple of hitches I couldn’t ignore.
During my testing, I came across a series of Remington 3200 Problems that just seem to come with the territory of owning a Remington 3200. These range from firing pin issues to problems with the barrel, trigger failures, and even light primer strikes.
This article aims to break down each problem one by one and provide practical solutions to get your Remington 3200 running smoothly. Let’s get this thing fine-tuned and ready for action, shall we?
Overview of Remington 3200 Problems & their Solutions
| Problems | Solutions |
| Firing Pin Issue | Clean and lubricate the firing pin and its channel. |
| Barrel Problem | Consider professional reaming and polishing. |
| Trigger Failure | Clean and lubricate the trigger assembly components. |
| Light Primer Strikes | Replace the weak hammer spring and clean the firing pin channel. |
Top 4 Remington 3200 Problems & Solutions For The Remington 3200
1. Firing Pin Issue
So, here’s the thing about the firing pin issue I faced. During my time with the Remington 3200, I noticed that the firing pin wasn’t always reliable.
Sometimes, it just wouldn’t strike hard enough, or it would stick, causing a misfire. It’s frustrating, especially when you’re out hunting and counting on your shotgun to perform well.
If you’re experiencing the same thing, you’re not alone. It’s not just an inconvenience; it’s a matter of safety and performance.
Solution
Alright, on to the good stuff—fixing the problem. First off, I’d strongly recommend checking if the firing pin is visibly worn or damaged. If it is, a replacement is the best course of action.
But here’s what worked for me: I disassembled the bolt assembly and gave the firing pin and its channel a thorough cleaning. It turns out that gunk buildup was causing the issue.
I also applied a thin layer of high-quality gun oil to make sure everything was well-lubricated. This significantly improved the firing pin’s reliability.
2. Barrel Problem
You know, barrel problems can be a real downer, and unfortunately, my Remington 3200 wasn’t immune. I noticed that the patterns I was getting weren’t as tight as they should be.
The spread was off, and it seemed like the barrel wasn’t doing its job right. It didn’t matter what type of ammo I used; the issue persisted.
It’s like you’re taking the time to aim properly, and then the barrel just decides to do its own thing. It’s not cool at all, especially when you’re out hunting, and accuracy is a must.
Solution
So, I was determined to get this sorted. The first thing I did was to clean the barrel inside and out. Surprisingly, a good cleaning session did make a slight difference.
But the real game-changer was having the barrel professionally reamed and polished. It took some time, and it’s not the cheapest solution, but man, did it improve the performance!
The patterns are much tighter now, and the spread is consistent. So, if you’re dealing with barrel issues, consider investing in a professional barrel service. Trust me, it’s worth every penny.
3. Trigger Failure
So, next on the list is the trigger issue, and let me tell you, this one caught me off guard. When you pull the trigger and nothing happens, it’s downright unsettling.
During my field tests, there were moments when the trigger on my Remington 3200 simply refused to cooperate.
Pulling the trigger and not hearing a shot is a big no-no, especially when you’re depending on your firearm to perform. This kind of failure doesn’t just mess with your aim; it messes with your confidence, too.
Solution
Here’s how I tackled this pesky issue. I first made sure the firearm was completely unloaded and safe to work on. Then, I disassembled the trigger assembly to have a good look. A lot of dirt and grime had built up, which seemed to be the culprit.
A careful cleaning of the trigger components and a light application of gun-specific lubricant did the trick for me. Just like that, the trigger was back in action, reliable as ever.
If you’re experiencing trigger issues, my advice would be to start with a comprehensive cleaning and lubrication. More often than not, that’ll sort you out.
4. Light Primer Strikes
Last but not least, let’s talk about light primer strikes, another issue that’s just a bummer to deal with. This problem reared its ugly head during my shooting sessions, and trust me, it’s frustrating.
You load up, aim, squeeze the trigger, and instead of a proper bang, you get a sad “click.” When you check the shell, you find a faint indentation on the primer, but not enough to ignite it.
It can ruin your whole day and seriously impact your accuracy and timing.
Solution
Alright, it’s time to cut to the chase and fix this. In my case, a weak hammer spring seemed to be the issue. Replacing it was a straightforward process and didn’t take much time. Plus, springs are relatively inexpensive.
I also went ahead and cleaned the firing pin channel just to rule out any obstruction that might be reducing the impact. Once the new hammer spring was in place and everything was cleaned up, the problem was gone.
My Remington 3200 started delivering solid strikes every time. If you’re experiencing light primer strikes, look into replacing the hammer spring and give the firing pin channel a good clean. Works like a charm!
Final Verdict
Alright, folks, so here’s the final verdict on the Remington 3200. It’s a classic shotgun that’s won a lot of hearts, but it does come with its own set of challenges.
From firing pin issues to barrel problems, trigger failures, and even light primer strikes, this gun makes you work a bit. But don’t let that deter you. With a few fixes, most of these problems can be ironed out.
After testing and sorting through each hiccup, my Remington 3200 is now running like a well-oiled machine.
So, weigh the pros and cons, consider the solutions we’ve discussed, and you’ll have a reliable shotgun that should last you a good long time.
FAQs
What was the recall on the Remington 3200?
The Remington 3200 was recalled due to a flaw in the top action tang, causing it to crack.
How much is a Remington 3200 Premier?
A Remington 3200 Premier can cost around $4995.
How long is the barrel on a Remington 3200?
The barrels on the Remington 3200 Special Trap are 30″ in length.
