Hey there, folks! I’m no stranger to the Remington 1100, and let me tell you, I’ve spent quite a bit of time with this shotgun out in the field. It’s an iconic piece, but even classics have their issues, right?
From cycling issues to barrel problems, I’ve seen it all. And let’s not forget the occasional feeding issue and the bolt lock problem that some of you might have faced, too. Trust me, it can be frustrating. But guess what? I’ve dug deep into these issues, so you don’t have to.
So, here’s the deal. This article aims to tackle these four main Remington 1100 Problems head-on. I’ll not only break down what’s going wrong but also give you some rock-solid solutions. No more scratching your head in despair; let’s get that Remington 1100 back in top shape!
Overview of the Problems & their Solutions
| Problems | Solutions |
| Cycling Issue | Clean and lubricate action parts. |
| Barrel Problem | Check for obstructions and ensure proper assembly. |
| Feeding Issue | Clean magazine tube, follower, and shell latch. |
| Bolt Lock | Clean and lubricate bolt lock mechanism. |
Top 5 Remington 1100 Problems & Solutions
1. Cycling Issue
So, you’re out there, pumped for a day of shooting, and bam—the cycling issue rears its ugly head. Trust me, I’ve been there. I’ll take a shot, pull the trigger, and nothing.
The gun just wouldn’t eject the spent shell or load the next round. Talk about a letdown! It’s like the shotgun suddenly decides to take a nap right when you need it the most.
No one likes to fumble around in the field; it totally kills the vibe. And hey, it can even be dangerous if you’re relying on the gun for safety.
Solution
Alright, enough of the problem. Let’s move on to the solution, shall we? First things first, make sure your gun is unloaded and always follow the proper safety guidelines.
Now, in my experience, this issue often boils down to poor maintenance or low-quality ammunition. So, I took the shotgun apart and gave it a proper clean. Pay special attention to the action bars and gas ports.
Once you’ve got everything spick and span, try using higher-quality ammo. I did exactly this, and it worked like a charm. Suddenly, the gun cycled just like it was supposed to. It’s not rocket science, just good upkeep.
2. Barrel Problem
Alright, let’s talk about another snag that I ran into the barrel issue. When you’re out shooting, the last thing you want is an inaccurate or inconsistent shot.
But guess what? That’s what happened to me. My shots started going astray, and my grouping was all over the place.
At first, I thought maybe it was me, perhaps a bad day or something. But as it turned out, the problem lay with the barrel itself. A close look revealed pitting and corrosion inside the barrel. Talk about a party pooper!
Solution
So, what’s the game plan to fix this barrel problem? First of all, unload that shotgun and take the barrel off. My go-to was a good barrel cleaner and a bore brush. With a little bit of elbow grease, I was able to remove most of the corrosion and pitting.
After cleaning, don’t forget to lightly oil the barrel to protect it from future issues. This cleaned up my shot groups considerably. I tested it out the next weekend, and let me tell you, the accuracy was back!
3. Feeding Issue
Okay, onto another hiccup you might face: the feeding issue. Picture this: you’re all set, you pull the trigger, and—nothing. The shell just won’t feed into the chamber. Super annoying, right? It happened to me more than a few times.
I found myself wrestling with the shotgun just to get a shell chambered. The reliability starts to tank, and so does your confidence in the firearm. Trust me, I’ve been there, and it’s not fun at all.
Solution
So, how did I get this sorted? The first thing, as always, is to ensure the firearm is unloaded. Safety first, folks! I started by taking a closer look at the magazine tube, the follower, and the shell latch. They were all guilty of being dirty and grimy.
Cleaning was the first order of business. Using a quality gun-cleaning solvent and a little scrubbing, I cleaned these parts thoroughly.
After the cleaning, I used some good gun oil to lubricate the necessary parts. And guess what? The next time I was out in the field, the shells fed into the chamber like a dream.
So, if you’re facing this issue, a good cleaning and lubrication session can make a world of difference. And if it still doesn’t work? Then, it might be time to take it to a pro.
4. Bolt Lock Problem
Last but not least, let’s talk about the bolt lock problem. This one’s a real mood killer. You fire a shot, and instead of the bolt cycling back as it should, it stays locked forward.
When this happened to me, I was more than a little frustrated. It pretty much turns your semi-auto into a single shot, and that’s not what any of us signed up for, right?
I had to manually pull back the bolt just to get it to cycle, and even then, it was iffy.
Solution
Now, for the fix. Safety is non-negotiable; make sure your firearm is unloaded before you start any work. After safely disassembling the firearm, I found that the bolt lock mechanism was dirtier than a mud puddle after a rainstorm.
So, I got my cleaning kit and set to work. I cleaned all parts related to the bolt lock mechanism and gave them a thin layer of quality lubricant.
After putting it back together and testing it out, the bolt cycled like it was fresh out of the box. Sometimes, it’s just grime and dirt that mess with the mechanism.
Final Verdict
Alright, folks, let’s wrap this up. The Remington 1100 is an iconic shotgun, no doubt about it. It’s got a legacy and a place in the hearts of many sports shooters and hunters. But like anything that’s been around the block, it has its share of issues.
From cycling problems to barrel issues, feeding hiccups to bolt lock troubles, I’ve seen them all. And let’s be honest; it can be super frustrating when you’re eager for a smooth day out in the field.
The good news? Most of these issues are fixable with a bit of TLC. Proper maintenance, quality ammunition, and some straightforward cleaning and lubricating can go a long way.
A well-maintained Remington 1100 is a joy to shoot with, but neglect it, and you’re asking for trouble. So treat it right, and it’ll treat you right in return.
FAQ’s
Are Remington 1100s reliable?
Yes, Remington 1100s are generally reliable for various hunting and shooting activities.
What year did they stop making Remington 1100?
Remington 1100s are still in production as of the latest available information.
Is the Remington 1100 rare?
While the standard Remington 1100 isn’t rare, certain limited editions can be hard to find.
How many rounds can a Remington 1100 hold?
A standard Remington 1100 can hold four 2 3/4-inch shells in the tube and one in the chamber.
