I’ve spent some good time out in the field with the Remington Speedmaster 552, and let me tell you, it’s a piece of equipment with a lot to offer. That being said, no firearm is perfect, right? During my time with it, I encountered a few issues that I think could be common for others, too.
So, in my experience, three Remington Speedmaster 552 Problems stuck out like a sore thumb: jamming, accuracy, and bolt issues. Yeah, I know, it’s a bit disappointing when you expect smooth sailing.
I’m here to talk about these problems, break them down, and offer some tried-and-true solutions. The goal? To make sure you can get the most out of your Remington Speedmaster 552.
Overview of Remington Speedmaster 552 Problems
| Problems | Solutions |
| Jamming Issue | Clean the chamber and consider changing your ammo. |
| Accuracy Issue | Adjust sights and check the barrel for obstructions. |
| Bolt Problem | Clean and lubricate the bolt; inspect for damage. |
Top 3 Remington Speedmaster 552 Problems & Solutions
1. Jamming Issue
So, first up, we have the jamming issue. I’ve had the 552 out on several trips, and I’ve gotta say, jamming was something that really took a bite out of my day.
You’re all set; you’ve got your target in sight, and then—nothing. The gun jams and the moment’s gone. It’s super frustrating, right? The experience wasn’t one-off either; it happened more times than I’d like to admit.
And when you’re out in the field, the last thing you want to be dealing with is an unreliable piece of equipment. The jamming seems to happen more often after firing a series of rounds, which makes it even more of a headache.
Solution
Alright, so how did I tackle this problem? Well, first of all, thorough cleaning is a must; you’d be surprised how much gunk can accumulate in the chamber.
I also switched up the ammo I was using. Yup, some brands seemed to jam more than others. Lastly, don’t overlook the magazine spring.
A weak spring might not push the next round into the chamber properly. So, consider replacing it if you’ve got an older model. Trust me, these changes made a world of difference for me. No more missing the action because of an untimely jam!
2. Accuracy Issue
Moving on, let’s talk about accuracy. Now, I don’t know about you, but when I take a shot, I expect it to hit where I aim. With the Speedmaster 552, that wasn’t always the case.
There were times when the shots were just off, and man, did that grind my gears. Whether I was target shooting or actually using it in more practical scenarios, the inconsistency in accuracy really put a damper on things.
At first, I thought maybe it was just me or the conditions I was in, but after multiple outings, it was clear that the problem was with the firearm itself.
Solution
So, what to do? First up, I looked at the sight alignment. That’s your first line of defense when it comes to accuracy issues. A slight adjustment there could go a long way. Next, I examined the barrel for any obstructions or imperfections that could mess with the bullet’s path.
It seemed fine, but if you find any issues, consider getting it professionally serviced. Lastly, I played around with different types of ammo.
Some rounds seemed to work better than others in terms of accuracy. After making these tweaks, the firearm performed much closer to what I had initially hoped for. No more pulling my hair out due to shots going astray!
3. Bolt Problem
Last on the list, but certainly not least, is the bolt problem. Ah, where do I start with this one? During my time in the field, I noticed the bolt was a bit too stiff for my liking.
You’re trying to load a round, but the bolt just doesn’t want to cooperate, almost like it’s got a mind of its own.
That stiffness really makes the operation clunky, and it’s not what you want when you’re trying to focus on your aim or get that perfect shot. It’s one of those things that might not seem like a big deal at first but get under your skin after a while.
Solution
So, how did I get around this? First things first, I gave the bolt a thorough cleaning. Even a little bit of grime or grit can affect how smoothly it operates.
Next, I applied some high-quality gun lubricant to the bolt. This isn’t the time to skimp out; get the good stuff. Trust me, it’ll make a difference. Finally, I took it apart and inspected the bolt for any physical damage or wear and tear.
If you spot any, you might need to get it replaced or serviced by a professional. After these steps, operating the bolt became way smoother, making the whole shooting experience much more enjoyable.
Final Verdict
Alright, folks, we’ve reached the end of the road, and it’s time to lay it all out. The Remington Speedmaster 552 is definitely a solid firearm, but like anything, it’s got its rough edges.
I ran into some jamming, accuracy, and bolt issues while testing it out in the field. Now, you might think that’s a deal-breaker but hold on a second. I’ve also shared some practical solutions to these problems—stuff I’ve tried myself.
By simply cleaning regularly, changing up your ammo, adjusting the sights, and using quality lubricant, you can transform your experience with this gun.
So, while it’s not perfect, it’s certainly not a lost cause. Think of it as a good tool that needs a bit of fine-tuning. And once you’ve got it all set up? Trust me, it can be a great addition to your collection.
FAQ’s
How old is a Remington Speedmaster Model 552?
The Remington Speedmaster Model 552 has been in production since 1957.
What is a Remington Speedmaster 552?
The Remington Speedmaster 552 is a semi-automatic rifle that can fire shorts, longs, and long rifle ammo.
Is the Remington 552 Speedmaster accurate?
With the right ammo, the Remington 552 Speedmaster can match the accuracy of many bolt action 22 rifles.
