5 Common Remington 770 Problems And How To Fix Them

I’ve been testing the Remington 770 out in the field, and I’ve got to tell you, it’s got its ups and downs. Considering its reputation and affordability, I was excited to try this firearm out. But, as I spent more time with it, I noticed several issues that needed some serious attention.

Specifically, I ran into Remington 770 Problems with the barrel, a sticky bolt problem, some trigger inconsistencies, a problem with the magazine lip, and, yes, even a broken stock issue. 

This article aims to guide you through these common problems with the Remington 770 and help you solve them. I want you to have the best experience possible with this firearm, so let’s dive in and get those issues sorted, shall we?

Overview of Remington 770 Problems And How To Fix Them

Problems	Solutions
Barrel Misalignment	Tighten the barrel mount or consult a professional for re-crowning.
Sticky Bolt	Clean and lubricate the bolt thoroughly.
Inconsistent Trigger	Deep clean the assembly or consider an aftermarket replacement.
Magazine Lip Issue	Grind down the front edge of the magazine to avoid catching.
Broken Stock	Contact the manufacturer for a replacement and reinforce sling mounts.

Top 5 Remington 770 Problems & Solutions for the Remington 770

1. Barrel Problem

So, let’s dive into the barrel issue. When you’re out there in the field, you expect your firearm to function like a well-oiled machine, right? 

But with the Remington 770, the barrel gave me a bit of trouble. Sometimes, shots veered off target, not due to wind or user error but because the barrel wasn’t aligned just so. 

This isn’t just a minor problem. No, sir! It’s a serious problem because your barrel should be reliable. When it’s not, it’s frustrating, especially when you know you’ve aimed well.

Solution

Alright, let’s tackle the solution. First, check the barrel’s mounting to ensure it’s secure. If it’s loose, that’s a big part of your problem. 

Tighten it up following the manufacturer’s guidelines. If that doesn’t do the trick, you might want to get it professionally examined. Sometimes, the issue could be internal, something you can’t fix with a basic toolkit. 

A pro can re-crown or even replace the barrel if necessary. I got mine looked at and fine-tuned, and the accuracy has been spot-on. Make sure you tackle this issue head-on, folks, it makes a world of difference!

2. Sticky Bolt Problem

Let’s get into another issue that grinded my gears—the sticky bolt problem. I mean, nobody wants to deal with a bolt that won’t budge when you’re in the middle of shooting. 

I found this especially annoying when I was trying to fire off multiple shots in quick succession. 

The bolt wouldn’t cycle smoothly, and each time it stuck, I felt like I was losing valuable seconds. And in the field, every second counts.

Solution

Alright, let’s nip this in the bud. The first step is to clean the bolt meticulously. Seriously, get in there with your cleaning tools and a high-quality solvent. 

Once that’s done, the next step is to lubricate the bolt. I used gun oil, but don’t overdo it; a thin layer will do the trick. 

After doing this, I took the gun for another test run and the bolt cycled perfectly. Smooth, fast, and no more stickiness.

If the problem persists even after cleaning and oiling, it might be time to get a professional to look. But from my experience, a good cleaning often solves the issue.

3. Trigger Issue

Okay, let’s talk about the trigger issue. When you pull that trigger, you’re expecting a smooth, crisp action. 

That’s the ideal scenario, right? But with the Remington 770, I found the trigger pull to be inconsistent. Sometimes it was smooth, and other times, not so much. 

You might think you’re squeezing the trigger the same way each time, but the gun acts like it has a mind of its own. 

This problem can lead to inaccurate shots, which is a big deal when you’re aiming for something specific.

Solution

So, what’s the fix here? First up, give the trigger assembly a deep cleaning. Use a specialized solvent designed for firearms and clean out any built-up residue. 

Then, apply a light layer of lubricant. But if you’re still experiencing inconsistencies after cleaning, you might want to consider replacing the trigger assembly. 

I did this as a last resort, installing an aftermarket trigger assembly, and it made all the difference. The pull became smooth and consistent, just as expected from a high-quality firearm. 

It’s a more extreme step, but it’s worth considering if you value your shooting experience.

4. Problem with the Magazine Lip

Let’s get into another issue that really tested my patience—the magazine lip problem. When you’re out in the field, the last thing you want is to fumble around because your bullets aren’t feeding properly. 

A few times, I noticed that the lip on the bullet would catch on the magazine’s edge. 

So what does that mean? Well, I actually had to discard some bullets because their lip got bent or peeled up. 

Solution

Alright, let’s get to fixing this issue. Based on my experience, the most effective solution is to grind down the front of the magazine just a smidge. 

Be careful; you don’t want to grind away too much. Just enough so that the bullet lip won’t catch. Use a grinder for this and take your time. I tried this fix and tested it out extensively. 

The result? No more catching, no more bent bullets. The magazine fed the bullets smoothly, and I was back to confident shooting. If you’re experiencing the same issue, give this a try; it worked wonders for me.

5. Broken Stock Issue

Here’s one that left me scratching my head: the broken stock issue. I was walking along, minding my business, with the Remington 770 shouldered. 

All of a sudden, I feel the gun shift oddly. What happened? The stock broke at the rear sling mount. I was dumbfounded. I’d only carried the gun a few times by the sling and never had any incidents—no bumps or drops, no rough handling. 

This was puzzling and downright frustrating. Having a reliable stock is fundamental for any shooting experience, so this was a major letdown.

Solution

So, how did I resolve this issue? Well, the first thing I did was contact Remington. Good news: They sent me a new stock at no charge. I replaced the old one, and it’s holding up so far. 

But I took an extra step. I inspected the new sling mounts to ensure they were securely attached and showed no signs of weakness. 

If you experience a similar problem, contact the manufacturer, but also consider reinforcing the sling mounts yourself or having a professional do it. An ounce of prevention, as they say, can go a long way in avoiding future headaches.

Final Verdict

So, what’s the bottom line? The Remington 770 is a decent firearm, especially for its price point. It can serve you well if you want to get to know it. 

However, it does come with its share of issues. We discussed barrel misalignment, sticky bolts, inconsistent triggers, problematic magazine lips, and broken stock. But here’s the deal: Most of these problems are fixable. 

I’ve run through solutions that worked for me, and they can work for you, too. It’s all about maintenance and, sometimes, a bit of modification. 

If you’re considering buying or owning one, don’t be disheartened by its weaknesses. With a little time and effort, you can turn this firearm into a reliable tool for the field.

FAQ’s

Is there a recall on Remington 770?

Yes, some models with specific trigger mechanisms have been recalled.

Is the Remington 770 still in production?

Yes, it’s manufactured in Huntsville, AL, as of 2017.

How many rounds does a Remington 770 hold?

Up to 4 rounds in the standard version, 3 in the magnum version, plus 1 in the chamber.

How heavy is a Remington 770?

It weighs around 8.5 lbs; not a lightweight firearm.