6 Most Common Taurus 709 Slim Problems And How To Fix Them

Last Update:

I spent considerable time testing the Taurus 709 Slim in various conditions, putting it through its paces to see how it performed.  My hands-on experience with this firearm allowed me to encounter a series of problems that users might face. 

I stumbled upon some common Taurus 709 Slim Problems, including trigger issues, failure to eject, misfire issues, magazine problems, jamming problems, and ejector problems. 

I want to share  my findings with you, detailing the issues I encountered and offering practical solutions.

Overview of the Problems & their Solutions

Trigger IssuesStraighten or replace bent trigger bar.
Failure To EjectAvoid limp wrists, clean gun regularly, and use correct ammunition.
Misfire IssuesInspect ammunition, firing pin, spring, clean residue, adjust gas systems.
Magazine ProblemsUse correct magazines, inspect ammunition, clean and check for broken parts.
Jamming ProblemsCheck ammunition, clean or replace broken or jammed parts, inspect barrel.
Ejector ProblemsContact Taurus for replacement or opt for a replacement ejector.

Problems & Solutions for the Taurus 709 Slim

1. Trigger Issues

While out in the field, I began to notice that the trigger on the Taurus 709 Slim had become incredibly stiff and difficult to pull. This wasn’t something I expected, so I dug in to figure out what was going on. 

The problem seemed to stem from the trigger bar of the gun. A bent tab on the trigger bar, responsible for engaging the striker, was the culprit. This bending caused stiffness, making it a real challenge to pull the trigger.


The solution I found was straightforward. By disassembling the gun and inspecting the trigger bar, I could see the bend and apply force in the opposite direction to straighten it out. 

It worked! In case of irreparable damage, I found that a replacement trigger bar could easily be found online. Installing it myself wasn’t a big deal, and it quickly resolved the issue. 

The trigger was back to normal, and I could continue  my field tests without any more trouble. Simple and effective!

2. Failure To Eject

During  my extensive field testing of the Taurus 709 Slim, I encountered a recurring issue: failure to eject, along with failure to feed. This problem manifested itself in different situations, and it quickly became a point of frustration for us. 

I found that the reasons could be a combination of a dirty gun, improper handling, incorrect ammunition length, or insufficient maintenance.


 my solutions involved a bit of detective work. I started by avoiding limp wrists, firming up  my grip and support arm while shooting. 

Next, I ensured that the gun was cleaned regularly and adequately oiled. Paying attention to ammunition with the correct overall length also proved crucial. 

When I replaced rounds that didn’t meet the specifications, the problem seemed to vanish. A thorough cleaning, proper lubrication, and careful inspection of parts were all it took to solve this issue. And just like that, I was back in business!

3. Misfire Issues

Misfiring was another unexpected challenge I faced while testing the Taurus 709 Slim. It seemed to come out of nowhere, and I was puzzled. 

As I dug deeper, I realized that the causes could be multifaceted, ranging from ammunition-related issues to problems with the internal components of the gun itself. 

Whether it was faulty primers, weak striking power from a worn-out firing pin, improper lubrication, or incorrectly adjusted gas systems, misfiring became a consistent obstacle for us.


 My approach to solving the misfiring issue was methodical. I carefully examined the ammunition, ensuring it wasn’t the cause. 

Then I inspected the firing pin and spring for wear and tear, replacing them if necessary. I was meticulous about cleaning any buildup or residue and correctly adjusting the gas systems. 

It took some effort, but  my hands-on approach paid off, and the misfiring issue was no more. I was back on track, feeling a sense of accomplishment and ready for  my next challenge.

4. Magazine Problems

Magazine problems were not something I were strangers to, especially with the Taurus 709 Slim. Out there in the field, these issues showed up in various forms, from frustrating jams to the failure to feed rounds. 

Whether it was due to faulty magazines, incorrect loading techniques, or simply dirt and debris, these problems created real setbacks for me during  my tests.


 My approach to solving these magazine issues was thorough. I made sure to use the correct magazines specifically designed for the Taurus 709 Slim. 

If I spotted wear or damage, I replaced them. Inspecting the ammunition for proper sizing and cleanliness became a routine step for us. 

Deformed rounds were immediately discarded. Inside the gun, a detailed check for broken parts and a good cleaning around the components got me back on track. 

5. Jamming Problems

Jamming was another major issue that I encountered during  my testing of the Taurus 709 Slim. Whether it was a misfit bullet, a dirty magazine, or a broken component within the gun, jamming wasn’t just an inconvenience; it was a complete halt in operation.

It’s a situation that requires immediate attention, as the inability to fire can be not only frustrating but dangerous in certain contexts.


The solution for me always began with double-checking the ammunition. Ensuring it was clean and the correct type for the gun was crucial. 

A thorough inspection of the gun for broken or jammed parts followed. If anything seemed out of place, I cleaned or replaced it. 

Checking the barrel for any obstructions and using specific cleaning tools helped me remove any hindrances. 

By following these steps meticulously, I was able to tackle the jamming issue and ensure that the Taurus 709 Slim was ready for action again.

6. Ejector Problems

One concerning problem I found with the Taurus 709 Slim during  my field test was the brittle ejector. It seemed like it wasn’t built to last, leading to multiple breakdowns. 

This led to a series of failures during use, which could result in potential damage to other parts of the firearm. 

The lack of sturdiness in the ejector was quite disappointing and raised questions about quality control.


I discovered that the solution was relatively straightforward. If the gun was still under warranty, contacting Taurus for a replacement was the best route. 

If not, I found that opting for a replacement ejector was also effective. While it’s an inconvenience to replace a part that should be durable from the start, these solutions did manage to fix the issue, allowing the firearm to function properly again. 

The problem with the ejector was a definite letdown, but it was something I were able to overcome with relative ease.


The Taurus 709 Slim is an interesting firearm with plenty of potential, but  my time spent in the field revealed several notable weaknesses. 

From trigger stiffness to ejector problems, the list of issues was certainly concerning. However, it’s worth mentioning that none of these problems were insurmountable. 

With a bit of effort and know-how, I was able to pinpoint practical solutions for each issue. 

The Taurus 709 Slim may not be flawless, but for those willing to invest some time in maintenance and care, it can be a reliable firearm. 


How many bullets does a Taurus 709 Slim hold? 

The flush-fitting magazine holds seven rounds of 9mm ammo.

Is the Taurus 709 slim? 

Yes, it’s less than an inch wide and only three ounces over one pound when empty.

Can Taurus 709 shoot 40? 

Yes, the 709 chambered in .40 S&W can hold 6+1 rounds.

What size is the Taurus 709 Slim? 

The Slim is less than 1 inch wide in both the slide and frame, with an overall length of 6.25 inches and height of 4.5 inches.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Photo of author


I'm Micheal, an avid shooter and hunting enthusiast from Texas. I'm a recreational shooter who loves to spend time at the range and enjoy learning about new firearms and gears. I love to write about guns and share my passion for shooting with others.

Leave a Comment