6 Most Common CZ P10S Problems And How To Fix Them

Recently, I had the chance to take the CZ P10S for a spin. Let me tell you, it’s a decent piece of machinery, but even the best things in life come with a catch. 

In my field tests, I stumbled upon a few issues that seemed more common than rare.

I want to give you a rundown on some problems I faced with this firearm. Specifically, we’re looking at six issues: slide problems, trigger issues, ejection malfunctions, feeding mishaps, gripping difficulties, and light primer strikes. 

That’s a lot to unpack, so I hope you’re buckled in!

 Overview of CZ P10S Problems & Solutions

Problems	Solutions
Slide Issue	Clean and lubricate the slide components.
Trigger Issue	Send it to CZ for expert troubleshooting.
Ejection Problem	Check the extractor, replace if worn out, and choose quality ammo.
Feeding Issue	Lock the slide, remove the magazine, rack the slide three times, insert a new magazine.
Gripping Problem	Opt for an extended magazine to improve grip.
Light Primer Strikes	Inspect and possibly replace the firing pin and spring, clean and use quality ammo.

Top 6 CZ P10S Problems & Solutions

1. Slide Issue

So, let’s talk about the slide issue I bumped into while field-testing the CZ P10S. To paint a clearer picture, the slide was locked back even though there was still ammo in the magazine. 

Yep, you heard it right! My first thought was, maybe it’s a one-time thing? But then, it happened again. It’s frustrating, especially when you’re counting on reliability.

Solution

Now, on to the nitty-gritty—how to fix this issue. I started with the basics: giving the pistol a thorough cleaning. Think of it like a spa day for your gun, where you get all the dirt and grime out. 

Followed it up by lubing the crucial parts. Kind of like moisturizing after a shower, you know? If you’re still having problems, it’s time to take it apart and make sure everything’s where it’s supposed to be when you put it back together. 

Worked for me, and I bet it’ll work for you, too.

2. Trigger Issue

Let’s move on to another gripe, folks—the trigger issue. Now, I experienced this firsthand when I was out in the field. 

The trigger suddenly felt slack, almost like a rubber band losing its tension. At first, I thought maybe it was a fluke. 

But nope, it happened multiple times. That’s not something you want to mess around with, especially if you’re in a situation where every shot counts.

Solution

Here comes the fix part. So, this isn’t a quick DIY fix, I’m afraid. I got in touch with CZ and sent my gun back to them. They took care of the issue, doing all the needed troubleshooting. 

Basically, they’re the experts; let them handle it. I got my P10S back, and it’s been smooth sailing, or should I say shooting, since then. 

If you’re dealing with the same issue, I highly recommend going straight to the source—CZ will get you sorted.

3. Ejection Problem

Okay, let’s dive into another issue: the ejection problem. When I was out testing this firearm, I noticed something odd—the cartridge was staying in the chamber instead of being ejected. Not just once, but a couple of times. 

That’s pretty concerning, right? Imagine needing to take multiple shots quickly, but your gun has other plans. It’s not the best scenario, let me tell you.

Solution

Now, let’s jump to the solution. First things first, I checked the extractor. Yep, this little arm is crucial for ejection.

Mine was worn out, so I replaced it. If you’re facing the same issue, give your extractor a good look-over. Another tip is to be cautious with your ammo choice. Bad ammo can mess things up, too. 

Last but not least, keep that firearm well-lubricated and clean. Did all of this, and voilà—my ejection issue was history. So, if you’re going through the same, these fixes should do the trick.

4. Feeding Issue

Alright, let’s chat about another headache: the double feeding issue. You know what’s worse than a failure to eject? A failure to eject followed by an attempt to double-feed. 

I was out in the field, pulled the trigger, and the gun tried to jam two rounds into the chamber instead of smoothly moving on to the next round. Talk about frustrating!

Solution

So, let’s roll up our sleeves and get into fixing this. If you find yourself in this jam—pun intended—first, lock the slide back. Then, get that magazine out of there. Give the slide a good three racks at least. 

Pop in a new magazine, and you should be good to fire. To avoid this in the future, just like with the ejection issue, keep that firearm clean and well-lubed. 

And hey, solving the failure to eject problem will probably nix this one, too. Two birds, one stone!

5. Gripping Problem

So, here we are at another stumbling block—the grip. The P-10 S is a subcompact gun, which is great for concealment but not so much for gripping. 

My hands aren’t gigantic, but even I struggled to get a solid hold on the thing. It felt like I was trying to palm a pebble while aiming. Not ideal, right?

Solution

Time for some good news. What worked for me was getting an extended magazine. Yup, it’s that simple. 

The extended mag provides that extra bit of real estate for your hands. Suddenly, the gun felt a lot more secure, and my aim improved because of it. If you’re grappling with the same issue, an extended magazine is a game-changer.

6. Light Primer Strikes

Let’s get into one more hiccup that had me scratching my head: light primer strikes. This is where you pull the trigger and hear the click, but nothing goes bang. 

I can’t tell you how often I’ve had this issue while testing the P-10 S in the field. This problem could be super dangerous in a life-or-death situation, not to mention it’s downright frustrating.

Solution

Now, let’s get down to the nitty-gritty. First off, check the firing pin and the spring. These are 

usually the culprits. A damaged or worn-out firing pin will ruin your day, trust me. 

After inspecting and possibly replacing these parts, give the gun a thorough clean and lubrication. Also, and this is crucial, use quality ammunition. I switched my ammo, and the problem was solved.

Conclusion

The CZ P10S is a bit of a mixed bag, but let’s be clear, it’s a robust firearm with plenty of upside. On the bright side, it’s compact, has a smooth trigger, and boasts an ergonomic grip. 

But, like any piece of machinery, it’s not without its issues—slide problems, trigger issues, ejection and feeding mishaps, and grip and light primer strike troubles, to be exact. 

The good news? All these issues are fixable, and once sorted, the gun performs like a champ. So, if you can tolerate some initial bumps on the road to reliable shooting, the CZ P10S could be a reliable addition to your arsenal.

FAQs

Is the CZ P10 S reliable?

Yes, it’s designed for reliability, especially in concealed carry and personal defense.

Did CZ discontinue the P10S?

Yes, it was discontinued in 2023.

Is CZ P10c drop safe?

Yes, it features a trigger safety that makes it drop safe.

What is the difference between P365 and CZ P10S?

The P365 is optimized for even smaller hands and tends to shoot better for those individuals.