Welcome to My Kel-Tec KS7 Problems Blog.
I’ve spent quite a bit of time in the field testing out the Kel-Tec KS7, and let me tell you, it’s an interesting piece of hardware. While it has a lot to offer, I’ve encountered a few issues that seem pretty common among users.
The issues I’ve experienced range from loading difficulties to jamming and even some firing problems.
In this article, I’ll break down each problem and give you some solutions that have worked for me.
Overview of Kel-Tec KS7 Problems Problems & Solutions
| Problems | Solutions |
| Loading Issue | Clean magazine tube and practice slow loading. |
| Jamming Problem | Clean the magazine after every use and lightly oil the follower. |
| Firing Problem | Deep clean focusing on firing pin and chamber. |
Top 3 Kel-Tec KS7 Problems & Solutions
1. Loading Issue
So, the first issue I bumped into was loading the shells. You’d think this part would be straightforward, right? But no, it wasn’t smooth sailing for me.
The magazine tube was a bit fussy, making it hard to feed the shells in without hassle. This isn’t just annoying; it’s a real inconvenience when you’re out in the field.
The shells sometimes wouldn’t seat correctly, and that led to all kinds of other problems down the line, like jamming and misfiring. The bottom line is that a shotgun that’s tricky to load is not your friend when you need it to function seamlessly.
Solution
Alright, onto the good stuff: how to fix this. The solution I found involves a bit of maintenance
and care. First off, keep the magazine tube and the follower clean; grime buildup can make loading a real chore.
Second, practice loading slowly to make sure each shell seats properly before moving on to the next one. It took me a few tries, but this process helped alleviate the issue.
Make sure your hands are positioned correctly, giving you maximum control while loading. These might seem like small steps, but trust me, they make a world of difference.
2. Jamming Problem
Ah, the dreaded jamming issue. Trust me, nothing gets the adrenaline pumping like realizing your magazine is jammed in the heat of the moment.
This happened to me more than once, and it’s beyond frustrating. Whether I was testing rapid-fire or going for single, precise shots, the jamming popped up to ruin my day.
The follower within the magazine tube seemed to get stuck, disrupting the flow of shells. It’s a serious hiccup that impacts reliability and makes you question the firearm’s performance when you need it most.
Solution
Okay, let’s cut to the chase: how do we fix this? One word: cleaning. This issue is often due to gunk and residue building up in the magazine tube.
Make it a habit to clean the magazine thoroughly after every use. You can use a magazine brush and a reliable firearm cleaner to scrub the grime. Then, lightly oil the follower and the inner walls of the tube.
This reduces friction and makes for a smoother feed. Take your time with the cleaning; your firearm’s performance depends on it. I did this, and the jamming issue was noticeably reduced.
3. Firing Problem
Last but not least, let’s talk about the firing issue. Now, this is where things get serious. You’ve got your shells loaded, and your magazine isn’t jammed, but when you pull the trigger, the shotgun doesn’t act.
This happened to me a couple of times, and let me tell you, it’s disconcerting. When you’re relying on a firearm, the last thing you want is for it to fail you when you pull the trigger.
I noticed that sometimes, the firing pin wouldn’t strike the primer hard enough, or it would miss altogether.
Solution
So, how did I solve this one? You guessed it: cleaning. It’s like the magic wand of firearm issues. You’ll want to dismantle the gun according to the manufacturer’s guidelines and clean it deeply.
Focus on the firing pin and the chamber; they usually accumulate dirt and residue that can interfere with firing. Use a good gun cleaner, and don’t skimp on it.
A clean firearm is a reliable firearm. After I gave my Kel-Tec KS7 a thorough cleaning, focusing especially on the firing pin and chamber, the firing issue was significantly improved. So, roll up those sleeves and get cleaning. It’s worth the effort.
Final Verdict
Alright, folks, let’s wrap this up. No doubt, the Kel-Tec KS7 has its share of issues, some of which made me scratch my head in disbelief.
However, after some thorough cleaning and adjustments, the KS7 proved itself to be more reliable. Many of the problems I encountered could be mitigated with proper maintenance and handling, which is encouraging for anyone invested in this shotgun.
So, while it’s not perfect out of the box, with a bit of effort and attention to detail, the KS7 can be a reliable addition to your armory. In the end, it’s about knowing your firearm and paying attention to the cleaning.
FAQ’s
Is the KelTec KS7 worth it?
Yes, despite its issues, it can be a reliable shotgun after some tweaks.
Can you shoot slugs in KelTec KS7?
Yes, the KS7 can handle slugs as well as birdshot and buckshot.
Does the KelTec KS7 have choke tubes?
Yes, it comes with a cylindric choke that is replaceable.
Is the KS7 a good shotgun?
Yes, its bullpup design and customizable features make it versatile for different needs.
