I have spent considerable time in the field, testing and evaluating the Taurus Tracker 44 Magnum.
During my testing phase, I encountered a few Taurus Tracker 44 Magnum Problems: trigger issues, double action problems, and accuracy issues.
The aim of this article is to share my findings with fellow firearm enthusiasts. I will discuss the problems and provide clear, straightforward solutions, making it easier for anyone facing similar issues to resolve them.
Overview of Taurus Tracker 44 Magnum Problems
Problems | Solutions |
Trigger Issues | Tap, rack, pull trigger again; spray ram oil; clean assembly |
Problems with the Double Action | Inspect faulty part, follow recommended steps; consult gunsmith if needed |
Accuracy Issues | Clean gun; change ammunition brand; consult local gunsmiths or Taurus if needed |
Top 3 Taurus Tracker 44 Magnum Problems & Solutions
1. Trigger Issues
During my rigorous field testing of the Tracker 44 Magnum, I encountered a trigger-freezing issue, a problem that took me by surprise.
The trigger would simply freeze, leaving me baffled. Moreover, I noticed the cylinder spinning or moving freely, something quite unusual. This was obviously something that needed addressing, and I were determined to understand the mechanics of these problems.
These issues were enough to disrupt my testing experience, and I realized that they could also lead to a serious performance drop for other users.
Solution
My practical approach led me to some immediate solutions. For the trigger freezing, a quick tap, rack, and pulling the trigger again seemed to help temporarily.
Also, I discovered that spraying ram oil into the revolver made a significant improvement. I found that poking the assembly into the up position and cleaning it worked well for the cylinder issue.
These were hands-on solutions that didn’t require specialized tools. However, I also realized that, in some cases, contacting Taurus might be the best course of action.
2. Problems with the Double Action
The problem I stumbled upon while testing the Tracker 44 Mag was an inconsistency between firing in single and double action mode. The gun was functioning correctly in single action but refused to fire in double action.
This was a serious concern as it might be a deal-breaker for some customers, especially those using hand loads. The issue seemed to be complex, involving different components of the firearm.
Solution
Addressing this problem required a careful inspection to locate the faulty part. The hammer, crossbar, and firing pin all needed to be scrutinized.
I followed the recommended steps of emptying the gun, pulling the hammer while holding the trigger down, and watching how the transfer reacted in both action modes.
This allowed me to identify the problem, and although some might need a gunsmith’s help, I managed to understand the root cause and take necessary action.
3. Accuracy Issues
Accuracy became a pressing concern as I proceeded with my field tests on the Tracker 44 Mag. It was an unexpected issue and one that certainly caught me off guard. After every five rounds, I observed up to a 12″ difference in the target group.
It made consistent aiming quite a challenge. I meticulously inspected the firearm and found that the rear sight being broken was a common problem.
Other factors like a faulty barrel or dirt inside the revolver also seemed to contribute to these accuracy issues. It was a concern that required immediate attention, as accuracy is a vital factor in the functionality of any firearm.
Solution
Through careful experimentation and consultation with experts, I realized that cleaning the gun did improve accuracy, but it was only a temporary fix.
Changing the ammunition brand showed some promising results, but I also understood that this problem might have deeper roots. I relentlessly tried to fix this, even consulting local gunsmiths.
The advice to contact Taurus if the problem persisted was something I kept in mind. my hands-on experience with these issues and the solutions I tested can provide a practical guide for others facing similar problems with accuracy.
Conclusion
The Tracker 44 Mag is a robust and powerful firearm with characteristics that can appeal to many. In my in-depth testing, I did uncover some flaws, notably concerning accuracy and certain mechanical issues.
However, with proper maintenance, usage of quality ammunition, and attention to detail, many of these issues can be mitigated or resolved. Even though some problems required professional consultation, the solutions were often simple and practical.
Overall, the Tracker 44 Mag represents a strong option for those seeking a .44 Magnum, but users must be aware of its potential weaknesses and be ready to act accordingly.
FAQs
Is a 44 Magnum accurate?
Yes, the .44 Magnum is very accurate, producing bullet groups of 3 to 4 inches at 50 yards with most ammunition.
How big is the Taurus Tracker 44?
The Taurus Tracker 44 has a minimum overall length of 9 inches.
How much does a Taurus Tracker 44 Magnum weigh?
The Taurus Tracker 44 Magnum weighs 35 ounces.
What frame is a Taurus tracker?
The Taurus Tracker fits into the medium-frame category.