I’ve recently been testing out the Walther CCP M2, and let me tell you, it’s a mixed bag. While it boasts some excellent features, I ran into a handful of issues that I feel need addressing.
Before you dismiss the Walther CCP M2 entirely, stick with me. I’ve also found some effective solutions for the issues I encountered.
In this article, we’re going to delve into common Walther CCP M2 Problems such as the gun not returning to battery, feeding failure, issues with the firing pin, ejection problems, and trigger issues.
The main aim here is to guide you through these challenges and offer reliable fixes. So, grab a seat, and let’s dive right in.
Overview of Walther CCP M2 Problems & their Solutions
| Problems | Quick Solutions |
| Not Returning to Battery | Use quality ammo and check the recoil spring. |
| Feeding Failure | Clean gun and use quality magazines and ammo. |
| Firing Pin Issues | Clean the firing pin channel and replace worn springs. |
| Ejection Problems | Deep clean, focus on piston and chamber. |
| Trigger Issues | Clean trigger assembly and use compressed air. |
Top 5 Walther CCP M2 Problems Problems & Solutions
1. Not Returning To Battery
So, let’s talk about the first issue I stumbled upon: the failure to return to battery. When I was at the range, I noticed something off; the slide wasn’t going all the way forward.
That’s not what you want, trust me. It messes up the timing, disrupts your shooting rhythm, and can be dangerous. This issue can throw you off, especially when you’re practicing or in a situation where every shot counts.
Solution
After some troubleshooting, I found a few ways to tackle this problem head-on. First, make sure your ammunition is up to snuff. It sounds basic, but the wrong or poor-quality ammo can mess up your firearm’s mechanics.
So, always go for factory-manufactured rounds that match the specifications in the manual. Second, check the recoil spring. If it’s not in good shape, replace it. I did this, and it made a world of difference.
Last but not least, make sure there’s no debris or anything lodged in the slide rails. A quick swipe with a brush fixed that right up for me.
2. Feeding Failure
Ah, the dreaded Failure to Feed, or FTF as we like to call it. While testing the Walther CCP M2, I had a few instances where the rounds just wouldn’t feed properly.
It’s super frustrating, let me tell you. One minute, you’re focused, ready to take your shot, and the next, you’re dealing with a jam.
An FTF can throw off your whole game, not to mention it raises safety concerns. There’s nothing worse than pulling the trigger and hearing a click instead of a bang.
Solution
I did a bit of tinkering to get to the bottom of this. First things first, clean your gun! It’s shocking how much a bit of grime can mess things up.
I followed the manual, cleaned out the carbon deposits, and applied some quality gun oil. I also took a close look at my magazines and ammo.
Swapped out the dodgy ones for quality pieces, and that seemed to make a big difference. Oh, and don’t forget the recoil spring! If it looks weak or damaged, do yourself a favor and get a new one. After all this, the FTF issues were pretty much a thing of the past.
3. Problem with the Firing Pin
Okay, onto another hiccup I faced—the firing pin. There I was, aiming with intent, and bam, or no bam! Misfires and jams aren’t just frustrating; they’re a safety concern.
In my experience, a faulty firing pin can turn a reliable shooting session into an unpredictable mess. This isn’t something you want to gloss over; a malfunctioning firing pin needs immediate attention.
Solution
After experiencing this problem, I decided to dig a bit deeper. First, I checked the firing pin channel, and, wouldn’t you know it, debris had built up. A cotton swab and some cleaning solvent worked wonders.
Don’t underestimate the power of a good clean. If you see extensive buildup, a small brush can do the trick. Also, take a moment to inspect other parts like springs and pins. I found that replacing a worn spring helped immensely.
If you’re still running into problems after all this, consider a deeper disassembly for a thorough check. Trust me, after giving it a good clean and replacing the necessary parts, your firing pin should be as good as new.
4. Ejection Problem
So, let’s talk about another issue: Failure To Eject, or FTE for short. While using the Walther CCP M2, I found that sometimes spent cartridges would stubbornly stick around instead of being cleanly ejected.
FTE is more than annoying; it can compromise your safety and disrupt your focus.
This pistol uses a gas-delayed blowback system, and the piston system seems to be a magnet for debris, leading to this issue.
Solution
After experiencing FTE, I decided to do some deep cleaning. First, I made sure the gun was unloaded. Safety first, folks.
Then, I got down to disassembling the gun, including the piston assembly, to clean every inch. A brass brush helped in scrubbing the piston and its chamber.
I also used a bore brush and patches to clean the chamber and barrel. Don’t skip this step; it’s crucial. Then, a quick lube, and I was back in action.
The FTE issues were significantly reduced. A clean gun is a happy gun, and mine sure was after that overhaul.
5. Trigger Problem
Alright, onto something that really gets on my nerves: trigger issues. While using the Walther CCP M2, I felt the trigger wasn’t as smooth as it should be.
It’s a red flag because it can mess with your big-time aim and timing.
Most of the time, this stickiness comes down to debris buildup inside the trigger mechanism. That tiny bit of grime can throw a serious wrench into the works.
Solution
After going through this hassle, I decided to give the trigger mechanism the cleaning of its life. The first step is to unload the gun for safety.
I then took a soft cloth and some quality gun-cleaning solvent and got to work. Wiping away dirt and grime is critical here. For those hard-to-reach spots, compressed air is a godsend. Just a quick burst, and it cleared away the stubborn particles like magic.
After doing this, the trigger felt as smooth as ever. It’s like giving your gun a mini spa day; do it, and you won’t regret it.
Final Verdict
In wrapping things up, the Walther CCP M2 has its own pros and cons. On the upside, it’s comfortable to hold, shoots well, and has solid safety features. However, like any piece of machinery, it’s not without its challenges.
I’ve had to deal with various issues like trigger stickiness, failure to return to battery, and ejection problems. But here’s the kicker: All of these problems have workable solutions.
Regular cleaning and maintenance, along with quality ammunition, can turn this firearm into a reliable companion.
So, if you’re open to rolling up your sleeves and doing a bit of upkeep, the Walther CCP M2 offers a solid experience for both novice and seasoned shooters.
FAQ’s
What is the difference between a Walther CCP and a Walther CCP M2?
The CCP M2 features a takedown lever for tool-less disassembly, unlike the original CCP.
Where is the Walther CCP M2 made?
The CCP M2 is entirely German-made.
Does Walther CCP M2 have a safety?
Yes, it comes with an external safety.
How many rounds can a Walther CCP M2 hold?
It holds 8 rounds in a single-stack design.
I have a Walther ccp, 9mm P2, that won’t go into battery.
Brand new, no rounds through it. Took it apart to clean it, assembled it, operated with dry fire…disassembled it, reassembled it, now it’s like the safety catch won’t let the stryker move. Slide only come back so far, about an 1/8 short. I called the distributor in Arkansas. All I got was attitude. I’m unable to contact local gun dealer.
Sorry to hear about the trouble with your new Walther CCP. It’s possible that something might have gone a bit off during reassembly. I’d suggest double-checking if everything’s aligned and properly seated. Sometimes, it’s just a small issue with the slide, guide rod, or recoil spring.
If you’re still stuck, reaching out to a different rep at the distributor or visiting your local gun dealer for a hands-on look might help. They often have the right experience to pinpoint and fix such issues.
I want a gun that I can count on no mater what I feed it or how it is abused because you can’t always guarantee perfect conditions when in use. When you have a list of problems that need to be addressed ( which is a great article by the way) for a gun to work properly that’s not the gun for me.
The Walther CCP M2 has its merits, but it does require some upkeep. If you’re looking for a no-fuss, reliable option, exploring other models might be the way to go.
That gas delay system is located directly under the barrel near the chamber. Most of the re-directed gas from that burning powder spews out the muzzle, but some makes its way around the piston. It’s gonna be a dirty shooting gun. For those CCP owners who have not tried it, Gunscrubber is your friend. A light dose of Rem-Oil after makes Walther happy.
Thanks for the tip! You’re right about the gas delay system making the CCP a bit messy. I appreciate the Gun scrubber and Rem-Oil suggestion – sounds like a game-changer for maintenance. Will definitely try it out. Cheers!